Set Day And Time; Adjust Temperature (Temporary Hold) - Carrier INFINITY SYSTXCCITC01 Owner's Manual

Hide thumbs Also See for INFINITY SYSTXCCITC01:

Table of Contents

benefit of greater comfort. Your installing contractor is able to enable this feature,

if desired. (This feature is only available with zoned systems).

S If HEAT is selected then the Infinity System Control operates only the

heating system.

S If COOL is selected then the Infinity System Control operates only the

cooling system.

S If FAN ONLY is selected, then the Infinity System Control operates the

indoor fan but heating, cooling, humidification or dehumidification will

not take place.

Set Day and Time

S To set the day and time for your home screen enter the Main Screen by

touching anywhere on the Control.

S Touch the DAY and TIME label located at the top middle of the screen

or access by going through the menu screen (see Pg. 40).

S To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the fea-

ture you wish to change.

S Use the Up (Y) and Down (B) buttons to make the appropriate

changes.

S When you have completed all of the settings, touch SAVE.

S If you make a mistake you may touch CANCEL and begin again.

The Infinity System Control allows you to temporarily override your programmed

schedule by adjusting the indoor temperature at any time to meet your needs.

NOTE: The Infinity System may seem slow to react to set point, activity and

system mode changes. This is normal, as the system will ramp up capacity and fan

speeds slowly to achieve the proper level of home conditioning, while avoiding

wasting energy, stressing home circuits and dimming lights with a "hard start."

Table of Contents