Fujitsu PRIMERGY TX1310 M3 Operating Manual page 54

Starting up and operation
Switching the server on
Figure 9: On/Off button of the server
– Starting up for the first time:
For Japan, please refer to " はじめにお読みください ".
Ê Press the On/Off button (1) (see figure
Ê Insert the ServerView Suite DVD in the DVD drive.
Ê Follow the on-screen instructions (see also section
server and installing the operating system with the ServerView
Installation Manager" on page 57
installing the operating system without the ServerView Installation
Manager" on page
– System already installed:
Ê Press the On/Off button (1) (see figure
The server is switched on, performs a system test and boots the
operating system.
Switching the server off
Ê Shut down the operating system properly.
The server is switched off automatically and goes into standby mode.
54
or section
58).
Operating Manual
9 on page 54).
"Configuring the
"Configuring the server and
9 on page 54).
TX1310 M3