Table of Contents
Advertisement
Workflow
The workflow for identifying cassettes and digitizing image plates depends on
the configuration of your system.
In the interchangeable configuration a cassette is uniquely identified by the
identification data in the cassette chip. Therefore, you must first identify the
cassette via the ID Station with ID Tablet before you can digitize the image plate.
Refer to
'Reading an image plate in the interchangeable configuration'
page 25.
An exception are emergency image plates which you can digitize without
having identified the cassette. The unidentified emergency image plate will
be given default ID data. Refer to
interchangeable configuration'
In the dedicated configuration the identification data are transmitted from the
ID Station to the dedicated ADC Solo via the network. Therefore, the ADC Solo
can digitize the image plate while you are entering the identification data on the
ID Station. Refer to
page 28.
24
on page 31.
'Reading an image plate in the dedicated configuration'
'Reading an emergency image plate in the
on
on
2301D EN 20040224
Advertisement
Table of Contents
