Safety Compliance - AGFA ADC Solo User Manual

Safety instructions for laser products
The ADC Solo is a Class 1 Laser Product. Under normal operating conditions -
when the service doors are closed - there can be no laser radiation outside the
ADC Solo.
• Open the lower front door only to replace the erasure lamps or the fuses. Open
the right side panel only to solve cassette or image plate jams. When you open the
lower front door or the right side panel, the power supply is switched off automati-
cally as a precaution.
• Follow meticulously the operation and troubleshooting instructions in the ADC
Solo User and Reference Manual. Other actions can be hazardous.

Safety compliance

The ADC Solo complies with:
• the general
CSA C22.2 No. 950;
• the radio interference regulations EN 55022:1997, Class B and FCC 47, Part 15,
Subchapter B, Class A;
• the laser
Parts 1040.10 and 1040.11.
8
safety regulations
safety regulations
EN 60950, EN 60601-1-2,
EN 60825-1:1994
UL 1950
and DHHS/FDA 21 CFR,
2301D EN 20040224
and