Workflow - AGFA CR 25.0 User Manual

Workflow

The workflow for identifying cassettes and digitizing image plates depends on the
configuration of your system.
■
In the interchangeable configuration a cassette is uniquely identified by the
identification data in the cassette chip. Therefore, you must first identify the
cassette via the ID Station with ID Tablet before you can digitize the image plate.
Refer to 'Reading an image plate in the interchangeable configuration'
page 29.
❖
An exception are emergency image plates which you can digitize without
having identified the cassette. The unidentified emergency image plate will
be given default ID data. Refer to
interchangeable configuration'
■
In the dedicated configuration the identification data are transmitted from the
ID Station to the dedicated CR 25.0 via the network. Therefore, the CR 25.0 can
digitize the image plate while you are entering the identification data on the ID
Station. Refer to
page 32.
28
'Reading an image plate in the dedicated configuration'
'Reading an emergency image plate in the
on page 35.
on
on
2312A EN 20040909