Table of Contents
Advertisement
The user interface
The ADC Solo has three operation modes:
• the operator mode for basic operation;
• the key-operator mode for advanced operation;
• the service mode reserved for trained service personnel.
The functions of the operator mode are described in
('Operator
mode')'. An overview of the functions of the key-operator mode is
given in
'Survey of advanced functions ('Key-operator mode')'
detailed information on the key-operator mode, refer to the ADC Solo Reference
manual.
The ADC Solo interfaces with the user via:
• a keypad and a display;
• a status indicator;
• emergency buttons;
• audio signals.
1 2
12
3
Chapter 2, 'Basic operation
on page 48. For
Status indicator
1
2
Emergency buttons
Keypad and display
3
2301D EN 20040224
Advertisement
Table of Contents
