Specifying User Film Type; Currently Supported Film Types - AGFA PCR II Plus User Manual

Specifying User Film Type

Two USER FILM TYPE selections are available for each camera mod-
ule. Use these selections to store your own customized look up table
and brightness, contrast, and repeat values.
When you use the SET FILM TYPE command to specify USER FILM
TYPE, the PCR II Plus calibrates the CRT brightness levels using your
customized brightness and contrast values. If one of your custom val-
ues exceeds the PCR II Plus limitations, a calibration error occurs. In
this case, you need to specify new brightness or contrast values and
reset the film recorder.
Note: Repeated calibration errors can indicate a
hardware problem.

Currently Supported Film Types

Table 3.1 lists the film types that the PCR II Plus currently supports.
The three columns show:
1. The abbreviated name that appears in the display window.
2. The film type that corresponds to the abbreviation.
3. The designated internal film number (required for direct program-
ming and for certain rasterizer applications).
Abbreviated Name
AGFA RS100 PLUS
AGFA OPTIMA 125
EKTA ISO100 PRO
VERICOLOR 3S
USER FILM 1
USER FILM 2
These are supported by all PCR II Plus camera modules.
Film Type
Agfachrome RS100 Plus Professional
Agfa Optima 125
Ektachrome 100 Professional EPN
Vericolor Type III S
Custom film type
Custom film type
Table 3.1. Supported film types.
Number
6
9
1
10
16
17
Film Control • 4-7