Adjusting Clutch Pedal; Adjusting Brake Pedal - Kubota MX4800 Operator's Manual

78 PERIODIC SERVICE
BAdjusting Clutch Pedal
[Manual Transmission Type]
Proper clutch pedal 20 to 30 mm (0.8 to 1.2 in.)
free travel on the pedal
C Adjusting procedure
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free
travel at top of pedal stroke.
3. If adjustment is needed, loosen the lock nut, remove
the cotter pin and adjust the rod length within
acceptable limits.
4. Retighten the lock nut and split the cotter pin.
(1) Clutch rod
(2) Nut
(3) Cotter pin
BAdjusting Brake Pedal
To avoid personal injury or death:
A Stop the engine and chock the wheels before
checking brake pedal.
Proper brake pedal
free travel
1. Release the parking brake.
2. Slightly depress the brake pedals and measure free
travel at the top of pedal stroke.
3. If adjustment is needed, loosen the lock nut and turn
the turnbuckle to adjust the rod length within
acceptable limits.
4. Retighten the lock nut.
(A) Free travel
15 to 20 mm (0.6 to 0.8 in.) on
the pedal
Keep the free travel in the right
and left brake pedals equal.
(1) Lock nut
(2) Turnbuckle
(A) "FREE TRAVEL"