Handset - Gigaset E560A Manual

Handset

Handset
Connecting the charger (if included)
2
¤
Connect the flat plug on the power
adapter .
1
¤
Plug the power adapter into the plug
socket .
2
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the battery and closing the battery cover
Only use a rechargeable battery, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the battery could be
destroyed or the battery could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¥
Insert the batteries (for
correct +/- direction, see
diagram).
10
1
To remove the plug from the charging cradle
again:
¤
Disconnect the power adapter from the mains
power supply.
¤
Press the release button
¤
Pull out the plug
2
¥
Fit the cover from the top
¥
Then press the cover until it
clicks into place
2
4
.
4
1
1 . To open the battery cover:
¥
Push the cover down
.
3
.
3
3
3
en fr es
.