Gigaset E560A Manual page 35

Activating/deactivating call screening
While the caller is leaving a message on the answer machine, you can listen in via the loud-
speaker on the base or handset.
Permanently activating/deactivating call screening
¤
Menu Answer Machine
Base OK ( = on)
Call screening can be simultaneously activated on the base and handset.
Deactivating call screening on the handset for the current recording
Press the end call key. The loudspeaker on the handset is deactivated.
Setting up the answer machine
The answer machine has already been preset at the factory. You can configure individual
settings via the handset.
Setting up ring delay
You can set the amount of time that elapses before the answer machine is to accept a call.
¤
Menu Answer Machine
No delay / 10 sec. / 18 sec. / 30 sec. / Auto Select and press OK (
With Auto the ring delay is as follows:
•
If there are no new messages, the answer machine answers a call after 18 seconds.
•
If new messages are present, the answer machine answers a call after 10 seconds.
Setting the message length
You can set a maximum message length.
The options are: 1 Minute, 2 Minutes, 3 Minutes or Unlimited.
¤
Menu Answer Machine
length OK (
Changing the language for the voice prompt and default announcement
¤
Menu
( = English;
en fr es
OK
OK
OK
= on)
= French; = Spanish)
Operating the answer machine
Call Screening OK
Ring Delay OK
Message Length
Enter the digit for the desired language
OK
Handset /
= on).
OK Select the message
33