Table of Contents
Advertisement
Charging the batteries
¤
Charge the batteries fully prior to first use in the
charging cradle/base.
The batteries are fully charged when the power
icon
disappears from the display.
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by Please register handset),
register the handset manually (
Setting the language
Display language
When using the device for the first time, you are prompted in English for the language required
for the display.
¤
. . . Use
to select the language required
Language for voice prompting and default answer machine announce-
ment
The default setting is English
¤
Menu
(
= English;
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so that
you can use the alarm.
¤
Press the display key below the display Time. The entry field will open.
¤
use
to enter the month, day and year in 8-digit format,
e. g.
To correct errors: Press left or right on the control key
¤
Enter the hours and minutes in 4-digit format using the keypad, e.g.
07:15. Switch between the fields using the control key, if necessary.
The display shows Saved. You will hear a confirmation tone.
To revert to idle status:
en fr es
page 41).
= French;
= Spanish)
Press and hold the End call key
OK
Enter the digit for the desired language
OK
for April 1st 2019.
in order to swap between fields.
.
Handset
OK
OK
for
11
Advertisement
Table of Contents
