Handset - Gigaset AS690 Duo Instructions Manual

Handset

Connect the charging cradle
¤
Connect the flat plug of the power
adapter
1
¤
Plug the power adapter into the
socket
2
To remove the plug from the charging cradle
again:
¤
Press the release button
¤
Pull out the plug
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film.
Inserting the batteries
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
damaged beyond repair or the batteries could explode. The device could also
malfunction or be damaged as a result of using batteries that are not of the recom-
mended type.
¤
Insert the batteries with
the polarity in the right
direction (refer to the
picture for +/- positions).
Charging the batteries
¤
Fully charge the batteries in the charging slot prior to
initial use.
The batteries are fully charged when the battery icon
disappears from the display.
Batteries can heat up during the charge process. This is not dangerous.
Over time, the charging capacity of the batteries will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. If a
handset has not been registered however, please register it manually (
(if included)
.
3
.
4
¤
Fit the battery cover from
the top.
¤
Push the cover closed until
it clicks into place.
1
2
To re-open the battery cover:
¤
Grip the notch on the
cover and slide it down-
wards.
Getting started
4
3
5h
p. 26).
9