Panasonic DMR-UBC90 Operating Instructions Manual page 61

Hide thumbs Also See for DMR-UBC90:
Table of Contents

Advertisement

Partial deleting
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select "Partial Delete" in "Edit", then press
[OK].
2 Press [OK] at the start point and end point to
delete.
• You can find the desired point by using play,
search, etc. (
53)
3 Select "Continue", then press [OK].
• Select "Next", then press [OK] to delete other
sections. Up to 20 sections can be set.
(
go to step 2)
4 Select "Delete", then press [OK].
5 Press [RETURN
• This function cannot be used on encrypted programmes
(
).
• Chapter Mark is generated in the scene that was partially
deleted.
Dividing programme
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select "Divide Programme" in "Edit", then
press [OK].
2 Press [OK] at the point to divide the
programme.
• You can find the desired point by using play,
search, etc. (
53)
3 Select "Continue", then press [OK].
4 Select "Divide", then press [OK].
To confirm the division point
After performing step 2.
Select "Preview", then press [OK].
• The unit plays 10 seconds before and after the
division point.
To change the division point
After performing step 2.
Restart play and select "Divide", then press [OK]
at the division point.
• [HDD] [USB_HDD] Divided programmes will become a group
of programmes.
• This function cannot be used on encrypted programmes
(
).
].
Picture Quality Change
[HDD] [USB_HDD]
The Picture Quality Change function changes the
recording mode of programmes in DR mode or
AVCHD format. Programmes will be smaller in
size after their recording mode is changed. It
takes about the same amount of time as
recording to change the mode.
1 On the Video Menu screen (
Select the programme in DR mode or the
AVCHD content.
• Multiple selection (
2 Press [OPTION].
3 Select "Picture Quality Change" in "Edit", then
press [OK].
e.g.,
Picture Quality Change
Change picture quality of the selected programme.
Please select picture quality and other options, then press OK.
Picture Quality
Subtitles
Audio Description
Timing
4 Set the picture quality change options, then
press [OK].
Picture Quality (
• [USB_HDD] You cannot select XP, SP and LP
mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the programme.
• Off
Subtitle will not be recorded.
Audio Description:
• Automatic
Audio Description will be recorded if they are
included in the programme.
• Off
Audio Description will not be recorded.
Timing:
• Now
A picture quality change starts immediately
after step 6.
• Time recordings cannot be made while a
picture quality change is in progress.
60):
60)
HL -- Longer Play
Off
Off
During standby
OK
RETURN
27):
TQBS0033
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr-ubs90

Table of Contents