Makita CL104D Instruction Manual page 12

Wash the dust bag in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried bag may
cause poor suction and shorten the service life of the
motor. (Fig. 28)
NOTE:
• Paper pack is a throw-away type.
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge filter
To remove the sponge filter, remove the dust bag or
paper pack and then pinch and take it out. (Fig. 29)
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper pack mounting
area. (Fig. 30)
CAUTION:
• After cleaning sponge filter, be sure to install it on the
cleaner. If washed in water, dry it up before installing.
An insufficiently dried sponge filter may shorten the
service life of the motor.
The nozzle cleaning
When the nozzle brush gets dusty, clean up the dust with
sticky. (Fig. 31)
Wall mount for cordless cleaner
Optional accessory
NOTE:
• The screw to mount the holder is not included. Prepare
a screw which fits with the material to screw into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount for
cordless cleaner can be firmly secured. Always be sure
that the wall mount for cordless cleaner is securely
attached before hanging the cleaner. (Fig. 32)
CAUTION:
• Do not hang the cleaner to the wall mount violently
or hang other appliances than the cleaner.
NOTE:
• When you don't charge the cleaner, the plug can be
stored on the wall mount for cordless cleaner as
illustrated.
12