Gas Connection; Leakage Control At The Connection Point - Beko BCT90GX1 User Manual

3 Installation

3.4 Gas connection

WARNING: Product can be con-
nected to gas supply system only by
an authorised and qualified person
or technician with licence.
A
Risk of explosion or toxication due to
unprofessional repairs!
Manufacturer shall not be held re-
sponsible for damages arising from
procedures carried out by unauthor-
ised or unlicensed persons.
WARNING: Before starting any
A
work on the gas installation, discon-
nect the gas supply.
There is the risk of explosion!
Gas adjustment conditions and values are stated
on labels (or ion type label).
C
The gas type of your product is stat-
ed on type label placed bottom of
cooktop.
A
WARNING: Risk of explosion and
suffocation!
Do not keep LPG cylinders in home.
• If you need to use your product later with a dif-
ferent type of gas, you must consult the Author-
ised Service Agent for the related conversion
procedure.
Built-In Hob / User Manual
3.5 Leakage control at the
connection point
• Make sure that all knobs on the product are
turned off. Make sure that the gas supply is
open. Prepare soapy foam and apply it onto the
connection point of the hose for gas leakage
control.
• Soapy part will froth if there is a gas leakage. In
this case, inspect the gas connection once again
C
Never use a match or lighter to make
the gas leakage control.
3.5.1 If there is a built-in oven
installed under the cooktop;
• Gas hose must be routed in a way that it will not
touch the oven, sharp edges or corners beneath
the cooktop, or will not be kinked or twisted.
• If you will make the gas connection from left
hand side when viewed from your position, fix
the hose with clamps.
1. Bottom view
2. Hose tip
3. Hose
4. Clamp
5. Oven
17 / EN