CyberData 011527 Setup Manual page 23

6. Press Create to make an Input Port for the SNMP messages from the button.
7. Set the Name, Port Identifier (OID), Port Switch, Message, and Recipient Groups.
Note: The CyberData OID is
The WiFi button is now ready to be used. CyberData recommends testing the button to ensure
that the message is set correctly and plays to the correct group.
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Figure 4-6. Edit Contact Closure.
1.3.6.1.4.1.45953.1.1.2.1.2.201
Figure 4-7. Create Input Port
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931822B Page 22