Installing The Ftdi Driver - CyberData 011527 Setup Manual

2.1 Installing the FTDI driver

One of the chips used by the WiFi button requires a special driver so the host PC can interact
with the button correctly. Please follow these steps to install the driver.
1. Run the included CDM21228_Setup.exe executable file to install the driver.
2. Press Extract to unpack the installer.
3. Press Next to begin the installation process.
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Figure 2-8. Extract the driver installer
Figure 2-9. Installation Wizard
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931822B Page 10