CyberData 011527 Setup Manual page 22

4. On the M2M Contact Closure page press Create.
5. Set the Name, Description, IP Address (of the button) and SNMP Community Name.
Press Save to create the contact closure.
Note: Since the M2M Contact Closures require the IP Address of the button to function as
expected it is recommended to set up the button with either a Static IP Address or a DHCP
Address reservation.
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Figure 4-4. M2M Relay Contact Closure
Figure 4-5. Create Contact Closure
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931822B Page 21