Replace The Filter And Wick; Understanding The Healthy Air Protect Lock; Replacing The Nanoprotect Filter (Fig. ‹) - Philips AC2729 User Manual

6 Replace the
filter and wick
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the Nano protect filter and the
humidification wick are in optimal
condition when the appliance is operating.
When the Nano protect filter and the
humidification wick are almost expired,
the replacement light
indicate that they need to be replaced.
If you do not replace the filter and
wick in time, the appliance will stop
operating and get locked.
EN
16
starts to flash to
Replacing the
NanoProtect filter (fig. ‹)
Note
•
The filter is not washable or
reusable.
•
Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
Filter alert light
status
A3 is displayed and
the filter replacement
light flashes on
the screen.
C7 is displayed and
the filter replacement
light flashes on
the screen.
1
Remove the used filters from the
appliance (fig. Œ).
Note
•
Do not touch the pleated filter
surface, or smell the filters as they
have collected pollutants from the air.
•
Wash your hands after disposing of
the used filters.
2
Remove all packaging material of
the new filters (fig. f).
3
Place the new filters into the
appliance (fig. g).
4
Touch and hold
reset the NanoProtect filter lifetime
counter.
Follow this
Replace the
NanoProtect
filter Series 3
(FY1410)
Replace the
NanoProtect
filter Active
Carbon (FY1413)
for 3 seconds to