QNAP TS-1677X Series User Manual
  1. Manuals
  2. Brands
  3. QNAP Manuals
  4. Storage
  5. TS-1677X Series
  6. User manual
QNAP TS-1677X Series User Manual

QNAP TS-1677X Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TS-1677X
TS-1677X
User Guide
Document Version: 2
11/06/2018

Advertisement

Table of Contents
loading

Related Manuals for QNAP TS-1677X Series

Summary of Contents for QNAP TS-1677X Series

  • Page 1 TS-1677X TS-1677X User Guide Document Version: 2 11/06/2018...

  • Page 2: Table Of Contents

    TS-1677X User Guide Contents 1. Preface About This Guide............................3 Audience...............................3 Document Conventions..........................3 2. Product Overview About the TS-1677X............................. 4 Hardware Specifications..........................4 Package Contents............................7 Components..............................7 Front Panel............................... 8 Rear Panel..............................9 Right Panel............................. 10 Left Panel............................... 10 Front Drive Numbering...........................
  • Page 3 6. Glossary CloudKey..............................49 CloudLink..............................49 myQNAPcloud............................49 myQNAPcloud ID............................49 Qfinder Pro..............................49 QTS................................49 7. Notices Limited Warranty............................50 Disclaimer..............................50 GNU Public License............................50 FCC Notice..............................58 CE Notice..............................58 SJ/T 11364-2006............................59...

  • Page 4: Preface

    TS-1677X User Guide 1. Preface About This Guide This guide provides information on the QNAP TS-1677X NAS and step-by-step instructions on installing the hardware. It also provides instructions on basic operations and troubleshooting information. Audience This document is intended for consumers and storage administrators. This guide assumes that the user has a basic understanding of storage and backup concepts.

  • Page 5: Product Overview

    Hardware Specifications Important Modifying the hardware or software of your QNAP product invalidates the warranty. QNAP is not responsible for any damage or data loss caused by unauthorized modifications and installation of unsupported third-party accessories or applications. Ordering P/N...
  • Page 6 • 16 GB RAM: 2 x 8 GB DDR4 • 64 GB RAM: 4 x 16 GB DDR4 Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Important Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
  • Page 7 Display panel Monochrome backlit LCD display with Enter and Select buttons IR sensor Note • The IR sensor requires a graphics card. • The QNAP RM-IR004 remote control is an optional separate purchase. Buttons • LCD enter • LCD select •...

  • Page 8: Package Contents

    • Non-condensing relative humidity: 5 to 95% • Wet-bulb temperature: 27˚C (80.6˚F) Security slot Kensington security slot Model specifications are subject to change without prior notice. To see the latest specifications, go to https://www.qnap.com. Package Contents Item Quantity TS-1677X NAS...

  • Page 9: Front Panel

    TS-1677X User Guide Front Panel Component Component Enter button USB One Touch Copy button Select button USB 3.0 One Touch Copy port IR sensor Drive LEDs Power button LCD Panel Product Overview...

  • Page 10: Rear Panel

    TS-1677X User Guide Rear Panel Component Component PCIe full-height cover 10GBASE-T RJ45 ports System fans 3.5 mm audio jack Power input 3.5 mm microphone jacks Speaker PCIe low-profile cover Power supply unit button PCIe low-profile cover Kensington security slot USB 3.0 Type-C port Reset button USB 3.0 Type-A port USB 3.0 Type-A ports...

  • Page 11: Right Panel

    TS-1677X User Guide Right Panel Component Component PCIe 3.0 x4 slot 2 Memory slot 2 PCIe 2.0 x4 slot 3 Memory slot 3 Memory slot 1 Memory slot 4 Left Panel Component Component PCIe 3.0 x8 slot 1 Product Overview...

  • Page 12: Front Drive Numbering

    TS-1677X User Guide Front Drive Numbering Installation Requirements Category Requirement Environment Install the NAS in an environment that meets the following criteria: • Room temperature: 0 to 40˚C (32 to 104˚F) • Non-condensing relative humidity: 5 to 95% • Wet-bulb temperature: 27˚C (80.6˚F) •...

  • Page 13: Setting Up The Nas

    TS-1677X User Guide Setting Up the NAS 1. Place your NAS device in an environment that meets the requirements. For details, see Installation Requirements. 2. Verify that the intake vents on the bottom of the case are unobstructed. 3. Remove the protective films from the LCD panel and the front cover. 4.

  • Page 14: Installation And Configuration

    TS-1677X User Guide 3. Installation and Configuration This chapter provides specific hardware and firmware installation and configuration steps. Hardware Installation This section provides information on installing drives, memory modules, and expansion cards. Drive Installation The TS-1677X is compatible with 3.5-inch, 2.5-inch hard drives, and 2.5-inch solid state drives. Installing 3.5-inch Hard Drives on 3.5-inch Trays Warning •...
  • Page 15 TS-1677X User Guide b. Place the drive on the tray so that the holes on the sides of the drive are aligned with the holes on the sides of the tray. c. Attach the fastening panels. d. Optional: Attach the screws to further secure the drive. Installation and Configuration...
  • Page 16 TS-1677X User Guide 4. Load the tray into the drive bay. a. Insert the tray into the bay. b. Push the handle. c. Slide the lock up. 5. Power on the NAS. Installing 2.5-inch Drives or Solid State Drives on 3.5-inch Trays Warning •...
  • Page 17 TS-1677X User Guide • Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Power off the NAS. 2. Remove the drive tray. a. Slide the lock down. b. Pull the handle to release the tray. c. Pull the tray out. 3.
  • Page 18 TS-1677X User Guide b. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes on the bottom of the tray. c. Attach the screws. 4. Load the tray into the drive bay. a.
  • Page 19 TS-1677X User Guide 5. Power on the NAS. Installing Solid State Drives on Solid State Drive Trays Warning • Installing a drive deletes all data on the drive. • Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Power off the NAS. 2.
  • Page 20 TS-1677X User Guide 3. Install a drive on the tray. a. Align the SATA connector on the drive with the opening at the end of the tray. b. Place the drive on the tray. 4. Load the tray into the bay. a.

  • Page 21: Installing Expansion Cards

    • Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Check the expansion cards and brackets supported by your model on the QNAP website. a. Go to www.qnap.com/compatibility. b. Click Search by NAS.
  • Page 22 TS-1677X User Guide 5. Remove the case cover. a. Remove the screws that secure the cover to the chassis. b. Slide the cover back. c. Pull the cover up until it completely detaches from the chassis. 6. Remove the PCIe cover. a.
  • Page 23 7. Attach the QNAP bracket to the expansion card. a. Remove all screws of the existing bracket. b. Carefully pull the bracket away from the card. c. Attach the QNAP bracket to the card using the same screws. Installation and Configuration...
  • Page 24 TS-1677X User Guide d. Verify that the bracket does not move. 8. Install the expansion card. a. Hold the card by the edges. b. Insert the card into the slot. c. Attach the screw. PCIe 3.0 x8 Installation and Configuration...
  • Page 25 TS-1677X User Guide PCIe 3.0 x4 d. Attach the PCIe power connector to the expansion card. Larger expansion cards may require you to attach the PCIe power connector before inserting the card into the slot. 9. Attach the case cover. a.

  • Page 26: Replacing Memory Modules

    The NAS has four memory slots. You can increase the memory capacity of the NAS by upgrading the memory modules. When using multiple modules, use only QNAP modules of the same type and capacity to maintain system performance and stability. You can purchase QNAP memory modules from authorized resellers.
  • Page 27 TS-1677X User Guide 4. Remove the case cover. a. Remove the screws that secure the cover to the chassis. b. Slide the cover back. c. Pull the cover up until it completely detaches from the chassis. 5. Remove the fan module. a.
  • Page 28 TS-1677X User Guide 6. Optional: Remove an existing module. a. Push the retention clips outward simultaneously to release the module. b. Hold the module by the edges and then carefully slide it out of the slot. Warning Attempting to remove a module that is not completely released may damage the module and the motherboard.
  • Page 29 TS-1677X User Guide c. Verify that the metal connectors are completely inserted into the slot. 8. Attach the fan module. a. Align the clip with the hole on the chassis. b. Push the module toward the system board until the clip locks the module into place. c.
  • Page 30 TS-1677X User Guide 9. Attach the case cover. a. Slide the cover down until it completely connects with the chassis. b. Slide the cover forward. c. Attach the screws to the back side of the case. 10. Connect all cables and external attachments. 11.

  • Page 31: Replacing Cpu Fans

    TS-1677X User Guide a. Log on to QTS as administrator. b. Go to Control Panel > System > System Status > Hardware Information . c. Check the value for Total memory. Replacing CPU Fans 1. Power off the NAS. 2. Disconnect the power cord from the electrical outlet. 3.
  • Page 32 TS-1677X User Guide b. Remove the screw that secures the fan module to the chassis. c. Press the fan module clip and then pull the module away from the system board. 6. Remove an existing fan. a. Remove the screws that secure the fan to the fan chassis. Installation and Configuration...
  • Page 33 TS-1677X User Guide b. Remove the fan cable from the clips on the fan chassis. c. Remove the fan from the chassis. 7. Install a new fan in the same location. a. Position the fan chassis so that the cable clips face upward. b.
  • Page 34 TS-1677X User Guide d. Attach the fan cable to the cable clips on the fan chassis. 8. Attach the fan module. a. Align the clip with the hole on the chassis. b. Push the module toward the system board until the clip locks the module into place. c.
  • Page 35 TS-1677X User Guide d. Connect the fan cable to the system board. 9. Attach the case cover. a. Slide the cover down until it completely connects with the chassis. b. Slide the cover forward. c. Attach the screws to the back side of the case. Installation and Configuration...

  • Page 36: Qts Installation

    10. Connect all cables and external attachments. 11. Connect the power cord to the electrical outlet. 12. Power on the NAS. QTS Installation The TS-1677X uses the QNAP QTS operating system. You can install QTS using any of the following methods. Method Description...

  • Page 37: Installing Qts Using Qfinder Pro

    ASCII characters. 7. Click Next. 8. Specify the time zone, date, and time. QNAP recommends connecting to an NTP server to ensure that the NAS follows the Coordinated Universal Time (UTC) standard. 9. Click Next. 10. Select Obtain an IP address automatically (DHCP).

  • Page 38: Installing Qts Using The Cloud Key

    1. Power on the NAS. 2. Connect the NAS to the internet. 3. Go to the QNAP Cloud Installation page using one of the following methods: • On your computer, go to http://install.qnap.com/. • Scan the QR code on the NAS using a mobile device.
  • Page 39 ASCII characters. 11. Click Next. 12. Specify the time zone, date, and time. QNAP recommends connecting to an NTP server to ensure that the NAS follows the Coordinated Universal Time (UTC) standard. 13. Click Next. 14. Select Obtain an IP address automatically (DHCP).
  • Page 40 TS-1677X User Guide 20. Select No. Note • Enabling the multimedia functions allows you to install multimedia applications after configuring the disks in Storage Manager. • For details on enabling multimedia functions on QTS, see the System Administration section of the QTS User Guide. 21.

  • Page 41: Basic Operations

    TS-1677X User Guide 4. Basic Operations This chapter describes basic NAS operations. Power Button Operation User Action Result Power on Press the button once. The NAS powers on. Power off Press and hold the button for 1.5 The NAS powers off. seconds.

  • Page 42: Lcd Panel

    TS-1677X User Guide For details on configuring USB One Touch Copy, see the QTS User Guide. LCD Panel The LCD panel allows you to perform the following operations: • Restart and power off the NAS • Configure or change the LCD panel password •...

  • Page 43: Viewing Drive Information

    TS-1677X User Guide The panel displays Main Menu 1. TCP/IP. 3. Press and hold Enter. The panel displays the IP address of the first network adapter. 4. Press Select repeatedly until the panel displays Enter Network Settings. 5. Press and hold Enter. The panel displays the network settings.

  • Page 44: Viewing System Information

    TS-1677X User Guide 6. Optional: Repeat step 5 as necessary. Viewing System Information Using the LCD panel, you can view the CPU temperature, system temperature, and system fan speed. 1. Press Enter or Select. The panel displays the NAS name and the QTS version. 2.

  • Page 45: Lcd Error Messages

    TS-1677X User Guide 3. Press Enter repeatedly until the panel displays Main Menu 7. Password. 4. Press and hold Enter. The Change Password screen appears. 5. Select Yes by pressing and holding Enter. The New Password screen appears. 6. Press Select and Enter to set the new password. •...
  • Page 46 TS-1677X User Guide Status Description System Status Flashes green and red • The drive is being formatted. alternately every 0.5 • The NAS is being initialized. seconds • The operating system is being updated. • RAID rebuilding is in progress. •...

  • Page 47: Beep Alarm

    TS-1677X User Guide Status Description Flashes blue every 0.5 sec • A USB device (connected to the front USB port) is detected. • A USB device (connected to the front USB port) is being removed from the NAS. • A USB device (connected to the front USB port of the NAS) is being accessed.

  • Page 48: Troubleshooting

    TS-1677X User Guide 5. Troubleshooting This chapter describes basic troubleshooting information. Forcing Qfinder Pro or myQNAPcloud to Locate the NAS If Qfinder Pro or myQNAPcloud is unable to locate the NAS during QTS installation, the drives or data may be faulty. 1.

  • Page 49: Recovering Unintentionally Removed Healthy Drives

    RAID Recovery Support Maximum Number of Removed Drives Single JBOD RAID 0 RAID 1 RAID 5 RAID 6 RAID 10 Support and Other Resources QNAP provides the following resources: Resource Documentation http://docs.qnap.com Helpdesk http://helpdesk.qnap.com Downloads http://download.qnap.com Community Forum http://forum.qnap.com Troubleshooting...

  • Page 50: Glossary

    Provides various remote access services such as DDNS and CloudLink myQNAPcloud ID Email address that was used to register for a myQNAPcloud account Qfinder Pro Enables you to locate and access the QNAP NAS devices in your local area network QNAP NAS operating system Glossary...

  • Page 51: Notices

    No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. Except as provided in QNAP's terms and conditions of sale for such products, QNAP assumes no liability whatsoever, and QNAP disclaims any express or implied warranty, relating to sale and/or use of QNAP products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
  • Page 52 TS-1677X User Guide Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.
  • Page 53 TS-1677X User Guide tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
  • Page 54 TS-1677X User Guide You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code;...
  • Page 55 TS-1677X User Guide the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source.
  • Page 56 TS-1677X User Guide a. Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b. Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c.
  • Page 57 TS-1677X User Guide An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
  • Page 58 TS-1677X User Guide If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all.

  • Page 59: Fcc Notice

    • Consult the dealer or an experienced radio/television technician for help. Important Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.

  • Page 60: Sj/T 11364-2006

    TS-1677X User Guide SJ/T 11364-2006 本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品 可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 0 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 Notices...

This manual is also suitable for:

Ts-1677x-1200-4gTs-1677x-1600-8gTs-1677x-1700-16gTs-1677x-1700-64g

Table of Contents