Table of Contents
Advertisement
The Function Menu
The Function menu is used for setting various functions of the projector.
Setting items
Audio Output Vol.
Smart APA
CC Display
Lamp Timer Reset
*2
Background
Start Up Image
Color
*3 *4
Calibration
All Reset
Notes
*1: Executes APA when a computer signal is input via the RGB/YP
*2: When using the Twin Picture display mode and there is no input signal, the background will be
black even if you set this item to "Image".
*3: The color calibration pattern is displayed while selecting this menu.
When you press the ?/1 button on the projector or the 1 button on the Remote Commander, the
pattern is turned off and this menu is disabled.
*4: Color drift may not be corrected properly due to environmental factors, such as temperature and
dust, or changes over time.
*5: You cannot select this if you have not performed the color calibration.
Description
The higher the setting, the higher an audio level output from the audio
output terminal. The lower the setting, the lower the audio level.
On/Off: When set to "On," executes APA automatically when a signal is
*1
input.
CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed caption
service (Captions or Text).
Off: Closed caption does not appear.
When replacing the lamp, resets the lamp timer (page 52).
Blue/Black/Image: Sets the background for when there is no input signal.
When set to "Image," the Start Up Image is displayed.
On/Off: When set to "On," the Start Up Image is displayed on the screen
upon startup of the projector.
Corrects color drift on the entire screen that has occurred over time.
Auto: If you select "On," it corrects color drift automatically when the
projector is turned off after certain time of use.
Start: When twenty minutes have passed after the light has been turned on,
it immediately corrects color drift.
*5
Return
: Restores the settings when performing the previous color
calibration.
Reset: Restores the factory default settings.
All settings are initialized to their factory preset values.
P
B
31
input terminal (INPUT A).
R
Advertisement
Table of Contents
