Safety Decals - Ferris ISX2200 Operator's Manual

1) Check for dirt or debris in the retraction mechanism. If
dirt or debris is found, it should be removed.
2) Check to make sure the retraction mechanism retracts
easily and completely.
3) Check for damage to any part of the seat belt (A,
Figure 3) such as nicks, cuts, loose stitching, or fraying.
4) Check that the buckle and latch (B) operate properly
and that the latch plate is not excessively worn,
deformed, or the buckle is damaged or cracked. The seat
belt should latch and release easily.

Safety Decals

Before operating your unit, read the safety decals. The
cautions and warnings are for your safety. To avoid a
personal injury or damage to the unit, understand and follow
all safety decals.
WARNING
If any safety decals become worn or damaged, and cannot
be read, order replacement decals from your local dealer.
4
*Decal is located on the seat support rail above the transmissions.
**Decals are located on the front of the Roll Bar pockets on the frame of
the unit.
A.) Part Number: 5106565 - Decal, Main Safety
B.) Part Number: 5061246 - Decal, Pinch Point
C.) Part Number: 5102456 - Decal, Fire
D.) Battery Safety Decal
E.) Part Number: 7106109 - Decal, Danger
F.) Part Number: 5061042 - Decal, Danger
G.) Part Number: 5100536 - Decal,
Safety, ROPS
H.) Part Number: 5100685 - Decal,
Warning, ROPS
I.) Part Number: 5100537 - Decal,
Safety, ROPS, Obstacles
11