Converting To Free-Arm Sewing - Singer Stylist 7258 Instruction Manual

卸辅助缝台

CONVERTING TO FREE-ARM SEWING

本机可以用于平板或筒式两种缝台。
装上辅助缝台，可以得到比较大的平板缝台。
卸辅助缝台，用双手将辅助缝台向左平移，直至全部移
出。若将它放回原位，将辅助缝台向右平移，直到咔嚓
滑入原位。
Your machine can be used either as a flat- bed or as a free-arm
model.
With the extension table in position, it provides a large working
surface.
To remove the extension table, hold it firmly with both hands and
pull it off to the left as shown. To replace, slide the extension table
back into place until it clicks.
With the extension table removed the machine converts into a free-
arm model for sewing children's clothes, cuffs, trouser legs, and
other hard-to-reach places.
大扩展台（选购件）
LARGE EXTENSION TABLE (OPTIONAL)
先将辅助缝台向左移出。
打开大扩展台的撑脚，把大扩展台沿着缝台向右平移，
如图箭头所示将 A、B、C、D 四个插销分别对应卡入
机器的插口。
To place onto the machine, lift the supporting leg of the extension
table, and slide the table into place while fitting the guide pins A, B,
C and D into machine as illustrated.
10
扩展台
Extension table
撑脚
Supporting leg