Zigzag Stitching; Adjusting Stitch Width And Length - Singer Stylist 7258 Instruction Manual

曲折缝线迹

ZIGZAG STITCHING

设置 SETTINGS ：
安装压脚 - 万能压脚
Presser foot - General Purpose Foot
上线张力 - AUTO（自动）
Thread tension control - AUTO
根据缝线、布料、线迹类型及缝纫速度，上线线迹出现
在布料的底面上，但下线不能出现在布料的表面上。
如果下线露出布料的表面，或者布料皱褶，需要稍微调
松上线张力。
The top thread may appear on the bottom depending on the thread,
fabric, type of stitch and sewing speed, but the bobbin thread must
never appear on the top of the fabric.
If bobbin thread is pulling to the top or you are experiencing
puckering, slightly reduce the tension with the Thread Tension
Control.
调节针幅和针距

ADJUSTING STITCH WIDTH AND LENGTH

图中深色方块表示选定此线迹时为默认（缺省）
的针幅和针距。
曲折缝线迹的默认针距是 2 毫米、针幅是 5 毫米。
Dark grey box indicates the Auto/default value set
automatically when the pattern is selected.
For the Zigzag Pattern the stitch length is 2 mm and the
stitch width is 5 mm.
浅色方块表示，可以调节的针幅和针距值。
The light grey boxes indicate all the possible personal
preference options available to set manualy.
32
反面
Under side
正面
Top side
针幅
STITCH WIDTH