Subaru 2004 Baja Owner's Manual page 69

Seat, seatbelt and SRS airbags
7. [If your child restraint system is of a flexible attach-
ment type (which uses tether belts to connect the child
restraint system properly to the lower anchorages)]
While pushing the child restraint into the seat cushion,
pull both left and right lower tether belts up to secure
the child restraint system firmly by taking up the slack
in the belt.
1-44
8. Pull the upper tether belt straight up to secure the
child restraint system firmly by taking up the slack in
the belt.
9. Put the loose end of the tether belts behind the
seatback.
10.Before seating a child in the child restraint system,
try to move seat back and forth and left and right to
verify that it is held securely in position.
11.To remove the child restraint system, follow the re-
verse procedures of installation.
If you have any question concerning proper child re-
straint system installation, ask your SUBARU dealer.