4. Loosen the jack holding screw by turning counter-
clockwise and remove the jack from the pocket.
NOTE
" Be careful not to lose the jack holding screw af-
ter removing it.
" Make sure the jack is well lubricated before us-
ing it.
! Restoring jack and tools
1. Strap the wheel nut wrench, jack drive tube, and
tire holding rod together using the two belts, then re-
turn them to the tool bag together with the other tools.
2. Contract the jack by turning the jack screw counter-
clockwise to the end.
In case of emergency
0
– CONTINUED –
9-5