Subaru 2004 Baja Owner's Manual page 198

2. Press the eject button (4). The selected disc will be
ejected and the indicator light will begin blinking.
3. To remove another disc, repeat step 1 and 2
choosing a different disc select button.
(To remove discs when the ignition switch is in the
"Lock" position, press the eject button, and the first
disc will be ejected. Press the eject button again, and
the next disc will be ejected and so on. At this time, the
disc select buttons are disabled.)
! To remove all discs at one time
1. Press and hold the eject button (4) until all "Disc" in-
dicators begin blinking (about 1.5 seconds), and the
first disc will be ejected.
2. When the disc is removed, the next one will be
ejected, and so on.
! To replace a playing disc with another
Simply press the desired one of disc select buttons (3)
(numbered from 1 to 6) or press the "DISC UP" or
"DISC DOWN" button on the radio unit to select the
desired disc, and the disc will begin to play.
! Disc indicators
Lit: when the corresponding storage tray is occupied
by a disc.
Blinking: Disc player is either in loading, eject or
changing mode.
OFF: No disc is loaded or the ignition switch is in the
"LOCK" position.
! Function control
Refer to CD player control operating instructions de-
scribed in the "AM/FM radio with CD player" section.
Audio
– CONTINUED –
5-29