Subaru 2004 Baja Owner's Manual page 106

1. Remove the side sill cover on the driver's side.
1) Open the driver's door.
2) Remove the two clips fastening the front portion
of the cover with a screwdriver.
3) Remove the side sill cover by pulling it up.
0
1) Connector for SRS airbag system (yellow)
2) White (1P)
2. Connect the white (1 pole) connector.
3. Turn the ignition switch from "LOCK" to "ON".
4. Install the side sill cover.
To place the system in active arming mode (remote re-
quired for activation), disconnect the white connector.
! Arming the system
In passive mode, the system will automatically
Keys and doors
– CONTINUED –
2-19