Turn Signal Lever; Illumination Brightness Control - Subaru 2000 Legacy Owner's Manual

Turn signal lever

Right turn
Left turn
To activate the right turn signal, push the turn signal lever up. To activate
the left turn signal, push the turn signal lever down. When the turn is fin-
ished, the lever will return automatically. If the lever does not return after
cornering, return the lever to the neutral position by hand.
To signal a lane change, push the turn signal lever up or down slightly
and hold it during the lane change. The turn signal indicator lights will
flash in the direction of the turn or lane change. The lever will return auto-
matically to the neutral position when you release it.

Illumination brightness control

Instruments and controls
HB2015BB
HB2017BB
– CONTINUED –
3-19