Warning And Indicator Lights; Seatbelt Warning Light And Chime; Srs Airbag System Warning Light; Check Engine Warning Light/Malfunction Indicator Lamp - Subaru 2000 Legacy Owner's Manual

Warning and indicator lights

Several of the warning and indicator lights come on momentarily and
then go out when the ignition switch is initially turned to the "ON" posi-
tion. This permits checking the operation of the bulbs.
Apply the parking brake and turn the ignition switch to the "ON" position.
The following lights come on:
Seatbelt warning light

SRS airbag system warning light

CHECK ENGINE warning light / Malfunction indicator lamp

Charge warning light

Oil pressure warning light

AT OIL temperature warning light (AT vehicles)

ABS warning light

Brake system warning light

If any lights fail to come on, it indicates a burned-out bulb or a malfunc-
tion of the corresponding system.
Consult your authorized SUBARU dealer for repair.
J Seatbelt warning light and chime
When the ignition switch is turned to the "ON" position, the seatbelt
warning light will come on and the reminder chime will sound for about
six seconds to remind the driver to fasten the seatbelt.
The seatbelt warning light remains on for about six seconds and turns off
automatically after six seconds.
The seatbelt reminder chime will turn off when the driver's side seatbelt is
buckled or it will turn off automatically after six seconds.
J SRS airbag system warning light
When the ignition switch is turned to the "ON" position, the SRS airbag
system warning light will come on for about six seconds and go out. This
shows the SRS frontal airbag and SRS side airbag (if equipped) and
seatbelt pretensioners are in normal operation.
If this light comes on while driving or does not go out after the engine
starts, it may indicate that the SRS frontal airbag system or SRS side air-
3-10
AIRBAG