Subaru 1998 Legacy Owner's Manual page 288

OM-H0377
The torque for tightening the nuts is 58 to 72 ft-lb (78 to 98 N-m, 8 to 10
kg-m). This torque is equivalent to applying about 88 to 110 lbs (40 to 50
kg) at the top of the wheel nut wrench. Never use your foot on the wheel
nut wrench or a pipe extension on the wrench because you may exceed
the specified torque. Have the wheel nut torque checked at a nearest
automotive service facility.
15. Store the flat tire in the spare tire compartment.
Attaching bolt
OM-4239
(If your vehicle is equipped with a temporary spare tire.) When storing a
conventional tire, put the spacer upside down and tighten the attaching
bolt firmly.
Also store the jack and wheel nut wrench in their storage locations. See
Tire Changing Tools in this section.
8-10