Pressure
hold valve
Link
2. Find the Pressure Hold Valve. It is located inside the engine compart-
ment under the brake fluid reservoir (big yellow cap).
Turn the link
clockwise
3. Turn the link clockwise to loosen the wire enough to form a loop.
4. Pull the wire out of its housing (by lifting with your finger).
5. Turn the link counterclockwise as far as possible. The device is now
inoperative and the vehicle can be moved.
Consult your nearest SUBARU dealer for repairs.
7-28
HB0295
Make the
loop
OM-H2364
OM-H2365