Table of Contents
Advertisement
high beam will stay on for as long as you hold the lever. The headlight
flasher works even though the lighting switch is in the "OFF" position.
When the headlights are on high beam, the high beam indicator light
"a" on the instrment panel also comes on.
B Daytime running light system (for CANADA models)
WARNING
The tail lights, parking lights, and side marker lights are not
turned on by the daytime running light system. The light switch
must always be turned to the "a" position when it is dark out-
side.
The low beam headlights will automatically come on at reduced bright-
ness when the engine has started, under the following conditions:
D The parking brake is fully released.
D The automatic transmission selector lever is set at other than
the "P" position.
D The light switch is in the "OFF" position.
B Turn signals
Right turn
Left turn
To activate the right turn signal, push the turn signal lever up. To acti-
vate the left turn signal, push the turn signal lever down. When the
turn is finished, the lever will return automatically. If the lever will not
return after cornering, return the lever to the neutral position by hand.
Instruments and controls
OM-H0361
– CONTINUED –
3-15
Advertisement
Chapters
Table of Contents
