Subaru 1998 Legacy Owner's Manual page 187

NOTE
D Only use good quality cassettes (cassettes longer than C-90 are not
recommended).
D Put cassettes back in their boxes immediately after use to protect
them from dust and dirt and to prevent the tape from unwinding.
D Never expose cassettes to heat, direct sunlight or moisture.
D Clean the tape head (once or twice a month) using a wet-type clean-
ing cassette.
J To play back a cassette tape
B When cassette tape is not in the player
When a cassette is partially inserted, it is automatically drawn in and
starts tape playback.
B When cassette tape is in the player
When the "TAPE" button is pressed, the display will indicate "PLAY"
and the player will start playback.
J Tape travel indicators
These indicate the direction the cassette tape is moving.
" indicates that the top side of the cassette is being played back.
A indicates that the bottom side of the cassette is being played back.
J Program switching button (PROG)
When the program switching button "PROG" is pressed during playback,
the tape travel indicators will switch and the player will begin playing
back the opposite side of the tape. The same mechanism is automatical-
ly activated when the end of the tape is reached. This allows the oppo-
site side of the tape to play, providing continuous playback.
J Fast-forward button (FF)
To fast-forward the tape, press the "FF" button. The display will indicate
"FF". To stop fast-forwarding, press the "FF" or "TAPE" button.
Audio
– CONTINUED –
5-35