Subaru 1998 Forester Owner's Manual page 216

4. Put wheel blocks at the front and rear of the tire diagonally opposite
the flat tire.
Jacking position
Wheel blocks
5. Take out the spare tire, jack, and wheel nut wrench. See Tire Chang-
ing Tools in this chapter.
6. Loosen the wheel nuts using the wheel nut wrench but do not remove
the nuts.
7. Place the jack under the side sill at the front or rear jack-up point clos-
est to the flat tire.
Turn the jackscrew by hand until the jack head engages firmly into the
jack-up point.
HS0148
HS0149
In case of emergency
– CONTINUED –
8-7