Bi.level Heating - Subaru 1998 Forester Owner's Manual

J Heating
To direct warm air toward the floor:
1. Set the air inlet selection lever to the "
2 Set the air outlet control dial to the "
3. Set the temperature control dial to the most comfortable level.
4. Set the fan speed control lever to the desired speed.
Warm air also comes out from the right and left air outlets. To stop warm
air flow from these outlets, turn the corresponding thumb-wheel to the
" " position.
J Bi.level heating
This setting allows you to direct air of different temperatures from the
instrument panel and outlets. The air from the foot outlets is slightly
4-6
HS0076
HS0078
" position
" position.
HS0077
HS0079