Subaru 1998 Forester Owner's Manual page 214

Engine lifting bracket
1
Connect one jumper cable to the positive (+) terminal on the dis-
charged battery.
2
Connect the other end of the jumper cable to the positive (+) termi-
nal of the booster battery.
3
Connect one end of the other cable to the negative (–) terminal of
the booster battery.
4
Connect the other end of the cable to the engine lifting bracket.
Make sure that the cables are not near any moving parts and that the
cable clamps are not in contact with any other metal.
5. Start the engine of the vehicle with the booster battery and run it at
moderate speed. Then start the engine of the vehicle that has the dis-
charged battery.
6. When finished, carefully disconnect the cables in exactly the reverse
order.
4
1
In case of emergency
3
2
Booster battery
HS0147
– CONTINUED –
8-5