Subaru 2008 Forester Owner's Manual
  1. Manuals
  2. Brands
  3. Subaru Manuals
  4. Automobile
  5. 2008 FORESTER
  6. Owner's manual

Subaru 2008 Forester Owner's Manual

Hide thumbs Also See for 2008 Forester:
Table of Contents

Advertisement

Quick Links

Download this manual
Foreword
Congratulations on choosing a SUBARU vehicle. This Owner's
Manual has all the information necessary to keep your SUBARU in
excellent condition and to properly maintain the emission control
system for minimizing emission pollutants. We urge you to read
his manual carefully so that you may understand your vehicle and
ts operation. For information not found in this Owner's Manual,
such as details concerning repairs or adjustments, please contact
he dealer from whom you purchased your SUBARU or the nearest
SUBARU dealer.
The information, specifications and illustrations found in this
manual are those in effect at the time of printing. FUJI HEAVY
NDUSTRIES LTD. reserves the right to change specifications and
designs at any time without prior notice and without incurring any
obligation to make the same or similar changes on vehicles
previously sold. This Owner's Manual applies to all models and
covers all equipment, including factory installed options. Some
explanations, therefore may be for equipment not installed in your
vehicle.
Please leave this manual in the vehicle at the time of resale. The
next owner will need the information found herein.
FUJI HEAVY INDUSTRIES LTD., TOKYO, JAPAN
is a registered trademark of FUJI HEAVY INDUSTRIES LTD.
*
C
copyright 2007 FUJI HEAVY INDUSTRIES LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2008 Forester and is the answer not in the manual?

Questions and answers

Related Manuals for Subaru 2008 Forester

Summary of Contents for Subaru 2008 Forester

  • Page 1 Foreword Congratulations on choosing a SUBARU vehicle. This Owner’s Manual has all the information necessary to keep your SUBARU in excellent condition and to properly maintain the emission control system for minimizing emission pollutants. We urge you to read his manual carefully so that you may understand your vehicle and ts operation.
  • Page 2 This manual describes the following vehicle types.* * The illustrated vehicle is one of the FORESTER series.

  • Page 4: Seat, Seatbelt And Srs Airbags

    Warranties & Warranties for U.S.A. All SUBARU vehicles distributed by Subaru of America, Inc. and sold at retail by an authorized SUBARU dealer in the United States come with the following warranties: SUBARU Limited Warranty Emission Control Systems Warranty Emissions Performance Warranty...

  • Page 5: Climate Control

    This chapter informs you how to keep your SUBARU looking good. Chapter 11: Maintenance and service This chapter informs you when you need to take your SUBARU to the dealer for scheduled maintenance and informs you how to keep your SUBARU running properly.

  • Page 6: Vehicle Symbols

    Vehicle symbols There are some of the symbols you may see on your vehicle. Mark Name WARNING CAUTION Power door lock Passengers’ windows lock Fuel Front fog lights Parking lights Hazard warning flasher Engine hood Mark Name Seat heater Child restraint top tether an- chorages Child restraint lower an- chorages...
  • Page 7 Mark Name Rear window defogger Air recirculation Engine oil Washer Door lock (Transmitter) Door unlock (Transmitter) Safety precautions when driving & Seatbelt and SRS airbag WARNING All persons in the vehicle should fasten their seatbelts BEFORE the vehicle starts to move. Other- wise, the possibility of serious injury becomes greater in the event of a sudden stop or acci-...

  • Page 8: Child Safety

    & Child safety WARNING Never hold a child on your lap or in your arms while the vehicle is moving. The passenger cannot protect the child from injury in a collision, because the child will be caught between the passen- ger and objects inside the vehi- cle.

  • Page 9: Drinking And Driving

    ing the vehicle. Never run the engine in a closed space, such as a garage, except for the brief time needed to drive the vehicle in or out of it. Avoid remaining in a parked vehicle for a lengthy time while the engine is running.

  • Page 10: Tire Pressures

    When possible, you should share the driving with others. & Modification of your vehicle CAUTION Your vehicle should not be modified other than with genuine Subaru parts and accessories. Other types of modifications could affect its performance, safety or durability, and may even violate governmental regulations.

  • Page 11: California Proposition 65 Warning

    vehicle control could lead to an accident. & California proposition 65 warning WARNING Engine exhaust, some of its consti- tuents, and certain vehicle compo- nents contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

  • Page 12: Table Of Contents

    Table of contents Seat, seatbelt and SRS airbags Keys and doors Instruments and controls Climate control Audio Interior equipment Starting and operating Driving tips In case of emergency Appearance care Maintenance and service Specifications Consumer information and Reporting safety defects Index...
  • Page 13 Illustrated index & Exterior Headlight switch (page 3-20) Replacing bulbs (page 11-46) Engine hood (page 11-4) Wiper switch (page 3-25) Roof rails (page 8-13) Door locks (page 2-4) Tire pressure (page 11-33) Flat tires (page 9-4) Tire chains (page 8-10) 10) Front fog light button (page 3-24) 11) Tie-down/Towing hooks (page 9-12)
  • Page 14 Rear window defogger button (page 3-28) Rear gate (page 2-20) Child safety locks (page 2-17) Fuel filler lid and cap (page 7-3) Tie-down/Towing hook (page 9-12) – CONTINUED –...
  • Page 15 & Interior ! Passenger compartment area Lower anchorage for child restraint sys- tem (page 1-31) Seatbelt (page 1-10) Moonroof (page 2-21) Parking brake lever (page 7-26) Front seat (page 1-2) Rear seat (page 1-7)
  • Page 16 Cup holder (page 6-7) Center console (page 6-4) Glove box (page 6-4) Front power supply socket (page 6-8) Pocket (if equipped) (page 6-7) AUX unit (if equipped) (page 6-8) – CONTINUED –...

  • Page 17: Instrument Panel

    & Instrument panel Door locks (page 2-4) Outside mirror switch (page 3-30) Light control lever (page 3-20) Combination meter (page 3-6) Wiper control lever (page 3-24) Hazard warning flasher switch (page 3-6) Audio (page 5-1) Gear shift lever (MT) (page 7-9) Selector lever (AT) (page 7-11) Climate control (page 4-1) 10) Cruise control (page 7-28)
  • Page 18 & Light control and wiper control levers/switches Parking light switch (page 3-23) Windshield wiper (page 3-24) Mist (page 3-26) Windshield washer (page 3-26) Rear window wiper and washer switch (page 3-26) Wiper control lever (page 3-25) Illumination brightness control (page 3-23) Light control lever (page 3-20) Headlight ON/OFF (page 3-20) 10) Headlight flasher High/Low beam...

  • Page 19: Combination Meter

    & Combination meter ! U.S.-spec. models ! AT vehicles Type A Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9) Select lever position indicator (page 3-17)
  • Page 20 Type B Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9) Select lever position indicator (page 3-17) –...
  • Page 21 ! MT vehicles Type A Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9)
  • Page 22 Type B Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9) – CONTINUED –...
  • Page 23 ! Canada-spec. models ! AT vehicles Type A Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9) Select lever position indicator (page 3-17)
  • Page 24 Type B Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9) Select lever position indicator (page 3-17) –...
  • Page 25 ! MT vehicles Type A Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9)
  • Page 26 Type B Fuel gauge (page 3-7) Temperature gauge (page 3-8) Speedometer (page 3-6) Tachometer (page 3-7) Trip meter A/B selection and trip meter reset knob (page 3-6) Odometer and trip meter (page 3-6) Outside temperature indicator (page 3-9) – CONTINUED –...

  • Page 27: Warning And Indicator Light

    & Warning and indicator light Mark Name Page Seatbelt warning light 3-10 SRS airbag system warn- 3-10 ing light Front passenger’s frontal 3-11 airbag ON indicator light Front passenger’s frontal 3-11 airbag OFF indicator light CHECK ENGINE warning light/Malfunction indicator 3-12 lamp Charge warning light...

  • Page 28: Tire Changing Tools

    & Tire changing tools Jack (page 9-15) Jack handle (page 9-15) Spare tire (page 9-4) – CONTINUED –...

  • Page 29: Cargo Area Cover

    & Cargo area cover Cargo area cover (page 6-13) Cargo tie-down hook (page 6-14) Accessory power outlet (page 6-8) Shopping bag hook (page 6-14)
  • Page 30 *SRS airbag (Supplemental Restraint System airbag)... 1-10 Vehicle with driver’s and front passenger’s SRS 1-11 airbags and lap/shoulder restraints ... Subaru advanced frontal airbag system... 1-11 SRS side airbag (if equipped) ... 1-12 SRS airbag system monitors... 1-12 SRS airbag system servicing ...

  • Page 31: Front Seats

    Seat, seatbelt and SRS airbags Front seats WARNING Never adjust the seat while driv- ing to avoid the possibility of loss of vehicle control and of personal injury. Before adjusting the seat, make sure the hands and feet of rear seat passengers are clear of the adjusting mechanism.

  • Page 32: Manual Seat

    tems, see the “Child restraint sys- tems” section in this chapter. & Manual seat ! Fore and aft adjustment Pull the lever upward and slide the seat to the desired position. Then release the lever and move the seat back and forth to make sure that it is securely locked into place.

  • Page 33: Power Seat (If Equipped)

    Seat, seatbelt and SRS airbags ! Seat height adjustment (Driver’s seat) Turn the dial backward to lower the seat. Turn the dial forward to raise the seat. Use the adjusting dial to adjust the height of the seat. & Power seat (if equipped) ! Fore and aft adjustment To adjust the seat forward or backward, move the control switch forward or back-...

  • Page 34: Lumbar Support (Driver's Seat)

    To adjust the seat height, pull up or push down the rear end of the control switch. ! Reclining the seatback WARNING To prevent the passenger from slid- ing under the seatbelt in the event of a collision, always put the seatback in the upright position while the vehicle is in motion.

  • Page 35: Head Restraint Adjustment

    If your vehicle is involved in a rear-end collision, have an authorized SUBARU dealer in- spect the active head restraints. The active head restraints may not operate in the event the vehicle experiences only a slight impact in the rear.

  • Page 36: Seat Heater (If Equipped)

    Seat heater (if equipped) HI – Rapid heating LO – Normal heating The seat heater operates when the igni- tion switch is either in the “Acc” or “ON” position. To turn on the seat heater, push the “LO” or “HI” position on the switch, as desired, depending on the temperature.

  • Page 37: Head Restraint Adjustment

    Seat, seatbelt and SRS airbags WARNING Never stack luggage or other cargo higher than the top of the seatback because it could tumble forward and injure passengers in the event of a sudden stop or accident. & Head restraint adjustment WARNING Never drive the vehicle with the head restraints removed because...

  • Page 38: Folding Down The Rear Seatback

    To raise the head restraint, pull it up. To lower it, push the head restraint down while pressing the release button on the top of the seatback. When the rear center seating position is occupied, place the head restraint to the click position.

  • Page 39: Armrest (If Equipped)

    1-10 Seat, seatbelt and SRS airbags Armrest (if equipped) To lower the armrest, pull on the top edge of the armrest. WARNING To avoid the possibility of serious injury, passengers must never be allowed to sit on the center armrest while the vehicle is in motion.

  • Page 40: Expectant Mothers

    According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seat- ing positions. For instructions and precautions concerning the child restraint system, see the “Child restraint systems” section in this chapter. Your vehicle is equipped with a crash sensing and diagnostic module, which will record the use of the seatbelt(s) by the...

  • Page 41: Seatbelt Warning Light And Chime

    ON next time, however, the complete sequence of warning opera- tion resumes. For further details about canceling the warning operation, please contact your SUBARU dealer. & Fastening the seatbelt WARNING Never use a belt that is twisted or reversed. In an accident, this can increase the risk or severity of injury.

  • Page 42: Front Seatbelts

    serious internal injury or death. Do not put cushions or any other materials between occupants and seatbacks or seat cushions. If you do so, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious internal injury or death.
  • Page 43 1-14 Seat, seatbelt and SRS airbags ! Adjusting the front seat shoulder belt anchor height The shoulder belt anchor height should be adjusted to the position best suited for the driver/front passenger. To lower the anchor height, push the release button and slide the anchor down. To raise the anchor height, slide the anchor up.
  • Page 44 4. To make the lap part tight, pull up on the shoulder belt. 5. Place the lap belt as low as possible on your hips, not on your waist. ! Adjusting the rear seat shoulder belt anchor height (window-side seating positions only) The shoulder belt anchor height should be adjusted to the position best suited for...

  • Page 45: Rear Center Seatbelt

    1-16 Seat, seatbelt and SRS airbags ! Rear center seatbelt Center seatbelt tongue plate Connector (tongue) Connector (buckle) Center seatbelt buckle WARNING Fastening the seatbelt with the web- bing twisted can increase the risk or severity of injury in an accident. When fastening the belt after it is pulled out from the retractor, espe- cially when inserting the connec-...
  • Page 46 plate rearward. 2. Pull out the seatbelt slowly from the overhead retractor. Seatbelt comfort guide 3. Pass the seatbelt through the seatbelt comfort guide located beside the head restraint. 4. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click is heard.
  • Page 47 1-18 Seat, seatbelt and SRS airbags 7. Place the lap belt as low as possible on your hips, not on your waist. ! Unfastening the seatbelt Push the release button of the center seatbelt buckle (on the left-hand side) to unfasten the seatbelt.

  • Page 48: Seatbelt Maintenance

    If the front seatbelts are not long enough to permit the tongue plate to engage with the seatbelt buckle, an optional seatbelt extender is available from your SUBARU dealer. When ordering an extender, only order one particularly designed for your vehicle.

  • Page 49: Front Seatbelt Pretensioners

    1-20 Seat, seatbelt and SRS airbags and warnings could reduce the effectiveness of the seatbelt and result in more serious injury in the event of a collision. Never use the extender when the belt itself is long enough to permit it to be buckled properly. If removal of heavy clothing is all that is needed to permit the seatbelt to be buckled properly,...
  • Page 50 SUBARU dealer. When replacing seat- belt retractor assemblies, use only genuine SUBARU parts. If either front seatbelt does not...

  • Page 51: System Monitors

    SRS airbag system. Immediately take your vehi- cle to your nearest SUBARU dealer to have the system checked. Unless checked and properly repaired, the seatbelt pretensioners and/or SRS...

  • Page 52: System Servicing

    1-23 Seat, seatbelt and SRS airbags & Precautions against vehicle modification Always consult your SUBARU dealer if you want to install any accessory parts to your vehicle. CAUTION Do not perform any of the following modifications. Such modifications can interfere with proper operation of the seatbelt pretensioners.

  • Page 53: Child Restraint Systems

    1-24 Seat, seatbelt and SRS airbags Child restraint systems Infants and small children should always be placed in an infant or child restraint system in the rear seat while riding in the vehicle. You should use an infant or child restraint system that meets Federal Motor Vehicle Safety Standards or Canada Motor Vehicle Safety Standards, is com-...

  • Page 54: Where To Place A Child Restraint System

    & Where to place a child re- straint system The following are SUBARU’s recommen- dations on where to place a child restraint system in your vehicle. A: Front passenger’s seat You should not install a child restraint...

  • Page 55: Choosing A Child Restraint System

    1-26 Seat, seatbelt and SRS airbags WARNING S I N C E Y O U R V E H I C L E EQUIPPED WITH A PASSENGER’S SRS AIRBAG, NEVER INSTALL A R E A R W A R D FA C I N G C H I L D SAFETY SEAT IN THE FRONT PAS- SENGER’S SEAT.
  • Page 56 child suffering personal injury in the event of an accident may be in- creased. ! Installing a rearward facing child restraint 1. Place the child restraint system in the rear seating position. 2. Run the lap and shoulder belt through or around the child restraint system following the instructions provided by its manufacturer.
  • Page 57 1-28 Seat, seatbelt and SRS airbags 8. To remove the child restraint system, press the release button on the seatbelt buckle and allow the belt to retract completely. The belt will return to the ELR mode. WARNING NEVER INSTALL A REARWARD FA- CING CHILD SEAT IN THE FRONT PASSENGER’S SEAT.

  • Page 58: Installing A Booster Seat

    6. Before having a child sit in the child restraint system, move it back and forth and right and left to check if it is firmly secured. Sometimes a child restraint can be more firmly secured by pushing it down into the seat cushion and then tightening the seatbelt.
  • Page 59 1-30 Seat, seatbelt and SRS airbags injuries or death to the child. CAUTION When you install a child restraint system, follow the manufacturer’s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position.

  • Page 60: Installation Of Child Restraint Systems By Use Of Lower And Tether Anchorages (Latch)

    & Installation of child restraint systems by use of lower and tether anchorages (LATCH) WARNING Child restraint systems and seat- belts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child.
  • Page 61 1-32 Seat, seatbelt and SRS airbags The tether anchorages (upper an- chorages) are provided for all the seating positions (center and both window-side ones) of the rear seat. You will find marks “ ” at the bottom of the rear seat seatbacks. These marks indicate the positions of the lower an- chorages (bars).

  • Page 62: Top Tether Anchorages

    If you have any question concerning this type of child restraint system, ask your SUBARU dealer. & Top tether anchorages Your vehicle is equipped with three top tether anchorages so that a child restraint system having a top tether can be installed in the rear seat.
  • Page 63 1-34 Seat, seatbelt and SRS airbags ! Anchorage location For left seat For center seat For right seat Three upper anchorages are installed on the rear edge of the roof. Open the cover flaps to use the tether anchorages. ! To hook the top tether 1.

  • Page 64: Srs Airbag (Supplemental Restraint System Airbag)

    CAUTION Always remove the head restraint when mounting a child restraint system with a top tether. Otherwise, it may not be possible to fasten the top tether tightly. *SRS airbag (Supplemental Restraint System airbag) *SRS: This stands for supplemental re- straint system.
  • Page 65 1-36 Seat, seatbelt and SRS airbags considerable speed – faster than the blink of an eye – and force to protect in high speed collisions, the force of an airbag can injure an occupant whose body is too close to SRS airbag. It is also important to wear your seatbelt to help avoid injuries that can result when the SRS...
  • Page 66 systems” section in this chapter. NEVER INSTALL A REARWARD FACING CHILD SEAT IN THE FRONT SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. Never allow a child to stand up, or to kneel on the front passen- ger’s seat, or never hold a child on your lap or in your arms.
  • Page 67 1-38 Seat, seatbelt and SRS airbags Airbag control module (including impact sensors) Frontal airbag module (driver’s side) Frontal airbag module (front passenger’s side) Front sub sensor (left-hand side) Front sub sensor (right-hand side) Side airbag module (driver’s side) Side airbag module (front passenger’s side) Side airbag sensor (center pillar left-hand side)

  • Page 68: Subaru Advanced Frontal Airbag System

    & Subaru advanced frontal air- bag system Your vehicle is equipped with a Subaru advanced frontal airbag system that com- plies with the new advanced frontal airbag requirements in the amended Federal Motor Vehicle Safety Standard (FMVSS) No. 208. The Subaru advanced frontal airbag sys- tem automatically determines the deploy- ment force of the driver’s SRS frontal...
  • Page 69 1-40 Seat, seatbelt and SRS airbags WARNING Never hold a child on your lap or in your arms. The SRS airbag deploys with considerable force and can injure or even kill the child. WARNING The SRS airbag deploys with con- siderable speed and force.
  • Page 70 SRS frontal airbag even when the driver’s SRS frontal airbag deploys. This is normal. Observe the following precautions. Failure to do so may prevent the Subaru ad- vanced frontal airbag system from func- tioning correctly or cause the system to fail.
  • Page 71 Do not remove or disassemble the front passenger’s seat. Do not install any accessory (such as an audio amplifier) other than a genuine SUBARU accessory under the front pas- senger’s seat. Do not place anything (shoes, umbrel- la, etc.) under the front passenger’s seat.
  • Page 72 2 seconds. After this, one of the indicators illuminates depending on the status of the front passenger’s SRS frontal airbag reached by the Subaru advanced frontal airbag system monitor- ing. If the front passenger’s SRS frontal airbag is activated, the passenger’s frontal airbag ON indicator will illuminate while the OFF indicator will remain extinguished.
  • Page 73 OFF indicator extinguishes after taking relevant corrective actions described above, relocate the child restraint system to the rear seat and immediately contact your SUBARU dealer for an inspection. NOTE When a child who has outgrown a child restraint system or a small adult is seated in the front passenger’s seat,...
  • Page 74 Subaru advanced airbag 1-45 Seat, seatbelt and SRS airbags system. If you have any questions, you...
  • Page 75 1-46 Seat, seatbelt and SRS airbags such an area, please contact the Subaru distributor or dealer from which you bought your vehicle.

  • Page 76: Operation

    Seat, seatbelt and SRS airbags The SRS airbag can function only when the ignition switch is in the “ON” position. The Subaru advanced frontal airbag sys- tem is designed to determine the activa- tion or deactivation condition of the front passenger’s SRS frontal airbag depend-...
  • Page 77 1-48 Seat, seatbelt and SRS airbags If the front sub sensors inside both front fenders and the impact sensors in the airbag control module detect a predeter- mined amount of force during a frontal collision, the control module sends signals to the airbag module(s) (only driver’s module or both driver’s and front passen- ger’s modules) instructing the module(s)
  • Page 78 ! Examples of accidents in which the driver’s/driver’s and front passen- ger’s SRS frontal airbag(s) will most likely deploy. A head-on collision against a thick con- crete wall at a vehicle speed of 12 to 19 mph (20 to 30 km/h) or higher activates only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags.
  • Page 79 1-50 Seat, seatbelt and SRS airbags ! Examples of the types of accidents in which deployment of the driver’s/ driver’s and front passenger’s SRS frontal airbag(s) is unlikely to occur. There are many types of collisions which might not necessarily require deployment of driver’s/driver’s and front passenger’s SRS frontal airbag(s).

  • Page 80: Srs Side Airbag (If Equipped)

    to deploy if the vehicle is struck from the side or from behind, or if it rolls onto its side or roof, or if it is involved in a low- speed frontal collision. First impact Second impact In an accident where the vehicle is impacted more than once, the driver’s and/or front passenger’s SRS frontal airbag(s) will deploy only once on the first...
  • Page 81 1-52 Seat, seatbelt and SRS airbags WARNING Do not rest your arm on either front door or its internal trim. It could be injured in the event of SRS side airbag deployment. WARNING Never allow a child to kneel on the front passenger’s seat facing the side window or to wrap his/her arms around the front seat seatback.
  • Page 82 event of the SRS side airbag deploy- ment, they could be propelled dan- gerously toward the vehicle’s occu- pants and cause injuries. WARNING Do not put any kind of cover or clothes or other objects over either front seatback and do not attach labels or stickers to the front seat surface on or near the SRS side airbag.
  • Page 83 1-54 Seat, seatbelt and SRS airbags CAUTION Do not touch the SRS side airbag system components around the front seat seatback with bare hands right after deployment. Doing so can cause burns because the compo- nents can be very hot as a result of deployment.
  • Page 84 ! Examples of the types of accidents in which the SRS side airbag is unlikely to deploy. 1-55 Seat, seatbelt and SRS airbags The vehicle is involved in an oblique side-on impact. The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment.

  • Page 85: Srs Airbag System Monitors

    1-56 Seat, seatbelt and SRS airbags ! Examples of the types of accidents in which the SRS side airbag will basically not deploy. The vehicle is involved in frontal collision with another vehicle (moving or station- ary). The vehicle is struck from behind. The SRS side airbag is basically not designed to deploy if the vehicle is involved in a frontal collision or is struck...

  • Page 86: Srs Airbag System Servicing

    SRS airbag system. Immediately take your vehi- cle to your nearest SUBARU dealer to have the system checked. Unless checked and properly repaired, the seatbelt pretensioners and/or SRS...

  • Page 87: Precautions Against Vehicle Modification

    In addition, if your vehicle is equipped with SRS side airbags, contact your SUBARU dealer as soon as possible in the following cases. Either center pillar or a nearby area of the vehicle was involved in an accident in which the SRS side airbag did not deploy.

  • Page 88: Seat, Seatbelt And Srs Airbags

    1-59 Seat, seatbelt and SRS airbags Always consult your SUBARU dealer if you want to install any accessory parts on your vehicle.
  • Page 89 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...
  • Page 90 Keys ... Key number ... Immobilizer (if equipped) ... Security ID plate... Security indicator light ... Key replacement ... Door locks ... Locking and unlocking from the outside ... Locking and unlocking from the inside ... Power door locking switches ... Key lock-in prevention function ...

  • Page 91: Keys And Doors

    Keys and doors Keys Vehicle with immobilizer system Master key (Black) Submaster key (Black) Valet key (Gray) Key number plate Security ID plate Vehicle without immobilizer system Master key Submaster key Valet key Key number plate Three types of keys are provided for your vehicle: Master key, submaster key and valet key.

  • Page 92: Immobilizer (If Equipped)

    Immobilizer (if equipped) The immobilizer system is designed to prevent an unauthorized persons from starting the engine. Only keys registered with your vehicle’s immobilizer system can be used to operate your vehicle. Even if an unregistered key fits into the ignition switch and can be turned to the “START”...

  • Page 93: Security Indicator Light

    If the security indicator light does not flash, the immobilizer system may be faulty. If this occurs, contact your SUBARU dealer as soon as possible. In case an unauthorized key is used (e.g. an imitation key), the security indicator light comes on.

  • Page 94: Locking And Unlocking From The Inside

    Rotate the lock lever rearward. Close the door. To lock the door from the outside without the key, rotate the lock lever rearward and then close the door. To lock the door from the outside using the power door locking switch, push the front side of the switch (“LOCK”...

  • Page 95: Power Door Locking Switches

    Keys and doors Power door locking switches Lock Unlock All doors and the rear gate can be locked and unlocked by the power door locking switches located at the driver’s side and the front passenger’s side doors. To lock all the doors and the rear gate, push the “LOCK”...

  • Page 96: Remote Keyless Entry System

    Remote keyless entry system CAUTION Do not expose the transmitter to severe shocks, such as those experienced as a result of drop- ping or throwing. Do not take the transmitter apart except when replacing the bat- tery. Do not get the transmitter wet. If it gets wet, wipe it dry with a cloth immediately.

  • Page 97: Unlocking The Doors

    Keys and doors you close the door, it will automatically lock. NOTE If the “ ” button is pressed for 2 seconds or longer, the panic alarm will sound. When locking the doors in normal circumstances, press the “ ” button for less than 2 seconds.

  • Page 98: Replacing The Battery

    If this happens, repeat the whole procedure from Step 1. You may have the above settings done by your SUBARU dealer. & Replacing the battery CAUTION Do not let dust, oil or water get on or in the transmitter when repla- cing the battery.
  • Page 99 2-10 Keys and doors ity reasons. It is recommended that you have your dealer program all of your transmitters into your system. ! Programming the transmitters The keyless entry system is equipped with a special code learning feature that allows you to program new transmitter codes into the system or to delete old ones.
  • Page 100 NOTE When you complete step 2), an electronic tone will sound once. If you do not perform steps 1) and 2) within 45 seconds, an error will occur. An electronic tone will not sound. In this event, perform the whole proce- dure again beginning with part 1.
  • Page 101 2-12 Keys and doors 7. Perform parts 5 and 6 of the procedure for each of the remaining digits of the transmitter code beginning with the sec- ond digit (counting from the left) and finishing with the eighth digit. NOTE When you finish entering the eighth digit, an electronic tone will sound for 30 seconds.

  • Page 102: Alarm System

    Keys and doors system is now activated. NOTE You may have the above setting change done by your SUBARU dealer. & If you have accidentally trig- gered the alarm system ! To stop the alarm Do any of the following operations: Press any button on the remote trans- mitter.
  • Page 103 2-14 Keys and doors : Press to Arm the system. : Press to Disarm the system. Security indicator light 6. Briefly press the “ ” button (for less than 2 seconds). All doors and the rear gate will lock, an electric chirp will sound once, the turn signal lights will flash once, and the indicator lights will start flashing rapidly.

  • Page 104: Disarming The System

    Note that in this mode, DOORS MUST BE MANUALLY LOCKED. ! To enter the passive mode If you wish to program the passive arming mode, have it done by your SUBARU – CONTINUED –...

  • Page 105: Tripped Sensor Identification

    2-16 Keys and doors dealer. ! Arming the system CAUTION In passive mode, the system will automatically activate the alarm but WILL NOT automatically lock the doors. In order to lock the doors you must either lock them as in- dicated in the following step 4 or with the key once they have been closed.

  • Page 106: Shock Sensors (Dealer Option)

    30 seconds. If you desire, your SUBARU dealer can connect them and set them for activation or deactivation. NOTE The shock sensors are not always...

  • Page 107: Windows

    2-18 Keys and doors the inner door handle lock lever. The door can only be opened from the outside. Windows & Power windows WARNING To avoid serious personal injury caused by entrapment, you must do the following. When operating the power win- dows, be extremely careful to prevent anyone’s fingers, arms, neck or head from being caught...
  • Page 108 ! Operating the driver’s window Open Automatically open Close To open: Push the switch down lightly and hold it. The window will open as long as the switch is held. This switch also has a one-touch auto down feature that allows the window to be opened fully without holding the switch.

  • Page 109: Rear Gate

    2-20 Keys and doors window switch cluster, located on the driver’s side door, is in the “LOCK” position, the passengers’ windows cannot be operated with the passengers’ switches. Rear gate WARNING Do not attempt to shut the rear gate while holding the inside handle.

  • Page 110: Moonroof (If Equipped)

    To close the rear gate, lower it slowly and push down firmly until the latch engages. The rear gate can be lowered easily if you pull down holding the recessed grip. NOTE If the rear gate cannot be unlocked due to a discharged battery, a fault in the door locking/unlocking system or other causes, you can unlock it by manually...

  • Page 111: To Open The Moonroof

    2-22 Keys and doors ignition switch is in the “ON” position. & To open the moonroof Push and quickly release the rear part of the switch to open the moonroof. The sun shade will also be opened together with the moonroof. The moonroof will stop at a position 20 in (50 cm) away from the fully closed position.

  • Page 112: At Vehicles

    Ignition switch ... LOCK... Acc... ON... START ... Key reminder chime ... Ignition switch light (if equipped) ... Key interlock release (AT vehicles only) ... Hazard warning flasher... Meters and gauges... Speedometer... Odometer/Trip meter... Tachometer ... Fuel gauge... Temperature gauge ... Outside temperature indicator ...
  • Page 113 Instruments and controls Wiper and washer ... 3-24 Windshield wiper and washer switches ... Rear window wiper and washer switch... Windshield wiper deicer (if equipped) ... 3-27 Rear window defogger button... 3-28 Mirrors ... 3-25 Inside mirror... 3-26 Outside mirrors ... Tilt steering wheel ...

  • Page 114: Ignition Switch

    Ignition switch WARNING Never turn the ignition switch to “LOCK” while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than usual to steer.

  • Page 115: Manual Transmission Vehicles

    Instruments and controls The key can be turned from “Acc” to “LOCK” only when the selector lever is in the “P” position. ! Manual transmission vehicles The key can be turned from “Acc” to “LOCK” only when the key is pushed in while turning it.

  • Page 116: Key Reminder Chime

    2. Remove the cover under the steering column using a Phillips screwdriver. 3. Turn the ignition key while pressing the key interlock release lever. Instruments and controls Take your vehicle to the nearest SUBARU dealer immediately to have the key inter- lock system repaired.

  • Page 117: Hazard Warning Flasher

    Instruments and controls Hazard warning flasher The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position. To turn on the hazard warning flasher, push the hazard warning button on the instrument panel.

  • Page 118: Tachometer

    trip or B trip meter by pushing the knob and keep the knob pushed for more than 2 seconds. CAUTION To ensure safety, do not attempt to change the function of the indicator during driving, as an accident could result. NOTE If the connection between the combina- tion meter and battery is broken for any...

  • Page 119: Low Fuel Warning Light

    Instruments and controls NOTE You will see the “ ” sign near the fuel gauge. This indicates that the fuel filler door (lid) is located on the right side of the vehicle. ! Low fuel warning light The low fuel warning light comes on when the tank is nearly empty [approximately 2.3 US gal (9.0 liters, 1.9 Imp gal)].

  • Page 120: Outside Temperature Indicator

    & Outside temperature indica- MT vehicles U.S.-spec. models Canada-spec. models AT vehicles U.S.-spec. models Canada-spec. models The outside temperature indicator is lo- cated below the odometer/trip meter. The indicator can indicate an outside tempera- ture ranging from −22 to 122 F (−30 to 50 C).

  • Page 121: Seatbelt Warning Light And Chime

    SRS airbag system. Immediately take your vehi- cle to your nearest SUBARU dealer to have the system checked. Unless checked and properly repaired, the seatbelt pretensioners and/or SRS...

  • Page 122: Front Passenger's Frontal Airbag On And Off Indicators

    2 seconds. After this, one of the indicators illuminates depending on the status of the front passenger’s SRS frontal airbag reached by the Subaru advanced frontal airbag system monitor- ing. If the front passenger’s SRS frontal airbag is activated, the passenger’s frontal airbag...

  • Page 123: Check Engine Warning Light/Malfunction Indicator Lamp

    CAUTION If the CHECK ENGINE light comes on while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possi- ble. Continued vehicle operation without having the emission control system checked and repaired as necessary could cause serious da- mage, which may not be covered by your vehicle’s warranty.

  • Page 124: At Oil Temperature Warning Light (At Vehicles)

    If the light flashes after the engine starts, it may indicate that the automatic transmis- sion control system is not working prop- erly. Contact your nearest SUBARU deal- er for service immediately. & ABS warning light The ABS warning light comes on when the ignition switch is turned to the “ON”...

  • Page 125: Vehicle Dynamics Control Warning Light (If Equipped)/Vehicle Dynamics Control Off In- Dicator Light (If Equipped)

    You will be safe while driving with this condition, but have your vehicle checked at a SUBARU dealer as soon as possible. NOTE If the warning light behavior is as...

  • Page 126: Brake System Warning Light

    If the fluid level is below the “MIN” mark in the reservoir, do not drive the vehicle. Have the vehicle towed to the nearest SUBARU dealer for repair. ! Electronic Brake Force Distribution (EBD) system warning...

  • Page 127: Door Open Warning Light

    The Vehicle Dynamics Control system is probably faulty under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately. The light does not come on when the ignition switch is turned to the “ON” position.

  • Page 128: Shift Position Indicator (At Vehicles)

    & Shift position indicator (AT vehicles) This indicator shows the position of the shift lever. & Turn signal indicator lights These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out.
  • Page 129 Should the warning light illuminate stea- dily after blinking for approximately one minute, have the system inspected by your nearest SUBARU dealer as soon as possible. WARNING If this light does not come on briefly...

  • Page 130: Cruise Control Indicator Light

    “Acc” or “LOCK” position, and then turn it again to the “ON” position. If this indicator light and the “ indicator light flash simultaneously during driving, have the vehicle checked by your nearest SUBARU dealer. & Cruise control set in- dicator light...

  • Page 131: Light Control Switch

    3-20 Instruments and controls set the minutes, press the “M” button. To reset the minutes to “00” with a radio time signal, push the “Reset” button. CAUTION To ensure safety, do not attempt to set the time while driving, as an accident from inadequate attention to the road could result.

  • Page 132: High/Low Beam Change (Dimmer)

    & High/low beam change (dim- mer) To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “ ” on the instru- ment panel is also on. To switch back to low beam, pull the lever back to the detent position.

  • Page 133: Turn Signal Lever

    3-22 Instruments and controls is dark outside. The low beam headlights will automati- cally come on at reduced brightness when the engine has started, under the following conditions: The parking brake is fully released. The light switch is in the “OFF” or “ position.

  • Page 134: Illumination Brightness Control

    Illumination brightness con- trol When the headlight switch is in the “ or “ ” position, you can adjust bright- ness of the instrument panel illumination for better visibility. To brighten, turn the control dial upward. To darken, turn the control dial downward. Headlight beam leveler (Ve- hicle with HID headlights) ”...

  • Page 135: Front Fog Light Button

    “LOCK” position and clean the window glass to allow proper wiper op- eration. Use clean water if windshield washer fluid is unavailable. In areas where water freezes in winter, use SUBARU Windshield Washer Fluid or the equivalent.

  • Page 136: Windshield Wiper And Washer Switches

    (See the “Windshield washer fluid” section in chapter 11.) Also, when driving the vehicle when there are freezing tempera- tures, use non-freezing type wi- per blades. Do not clean the wiper blades with gasoline or a solvent, such as paint thinner or benzene. This will cause deterioration of the wiper blades.

  • Page 137: Rear Window Wiper And Washer Switch

    3-26 Instruments and controls ! Wiper intermittent time control (if equipped) When the wiper switch is in the “ position, turn the dial to adjust the operat- ing interval of the wiper. The operating interval can be adjusted continuously from the shortest interval to the longest.

  • Page 138: Windshield Wiper Deicer (If Equipped)

    ON: Normal To turn the wiper off, return the knob on the end of the lever to the “OFF” position. ! Washer To wash the rear window while the rear wiper is operating, turn the knob on the end of the wiper control lever counter- clockwise to the “...

  • Page 139: Rear Window Defogger Button

    3-28 Instruments and controls Rear window defogger but- Manual climate control system Automatic climate control system The rear window defogger operates only when the ignition switch is in the “ON” position. The rear window defogger button is located on the climate control panel. To turn on the defogger, push the button.

  • Page 140: Mirrors

    Mirrors Always check that the inside and outside mirrors are properly adjusted before you start driving. & Inside mirror The inside mirror has a day and night position. Pull the tab at the bottom of the mirror toward you for the night position. Push it away for the day position.

  • Page 141: Compass Calibration

    3-30 Instruments and controls other similar items. Periodically wipe the sensors clean using a piece of dry soft cotton cloth or an applicator. ! Compass calibration 1. For optimum calibration, switch off all nonessential electrical accessories (rear window defogger, heater/air conditioning system, spotlight, etc.) and ensure all doors are shut.
  • Page 142 ! Remote control mirror switch Selection switch Direction control switch The remote control mirrors operate only when the ignition switch is in the “ON” or “Acc” position. 1. Press either end of the selection switch, “L” for the left, “R” for the right. 2.

  • Page 143: Tilt Steering Wheel

    3-32 Instruments and controls Tilt steering wheel WARNING Do not adjust the steering wheel tilt position while driving. This may cause loss of vehicle control and result in personal injury. 1. Adjust the seat position. Refer to the “Front seats” section (chapter 1). 2.

  • Page 144: Climate Control

    Ventilator... Air flow selection ... Center and side ventilators ... Manual climate control system (if equipped) ... Control panel ... Heater operation ... Air conditioner operation... Automatic climate control system (if equipped) ... Control panel ... To use as full-automatic climate control system...

  • Page 145: Climate Control

    Climate control Ventilator & Air flow selection...

  • Page 146: Center And Side Ventilators

    & Center and side ventilators ! Center ventilators Move the tab up and down or right and left to adjust the flow direction. ! Side ventilators Open Close Thumbwheel Move the tab up and down or right and left to adjust the flow direction. To open or close the ventilator, turn the thumbwheel up or down.

  • Page 147: Air Flow Control Dial

    Climate control ! Fan speed control dial The fan operates only when the ignition switch is turned to the “ON” position. The fan speed control dial is used to select four fan speeds. ! Air flow control dial This dial has the following five positions: : Air flows through the instrument panel outlets.

  • Page 148: Heater Operation

    WARNING Continued operation with the air inlet selection button in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears. & Heater operation ! Defrosting or defogging the wind- shield To direct warm air to the windshield and front door windows:...

  • Page 149: Bi-Level Heating

    Climate control NOTE Warm air also comes out from the right and left air outlets. To stop warm air flow from these outlets, turn the corre- sponding thumbwheel down. ! Heating To direct warm air toward the floor: 1. Set the air inlet selection button to the OFF position.

  • Page 150: Air Conditioner Operation

    When driving on a dusty road, set the air inlet selection button to the “ON” position. WARNING Continued operation with the air inlet selection button in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears.

  • Page 151: Automatic Climate Control System (If Equipped)

    Climate control Automatic climate control system (if equipped) Although this climate control system can be used as a full-automatic climate control system, it can also, if desired, be used as a semi-automatic climate control system. When it is used as a full-automatic climate control system, the outlet air temperature, fan speed, air flow distribution, air inlet control, and air conditioner compressor...

  • Page 152: Fan Speed Control Dial

    SUBARU recom- mends using the AUTO position. Other positions: The fan speed can be adjusted in seven steps.

  • Page 153: Air Inlet Selection Button

    Pressing the air inlet selection button cancels the AUTO mode. SUBARU re- commends using the AUTO position. WARNING Continued operation in the ON posi- tion may fog up the windows.

  • Page 154: Temperature Sensors

    Pressing the button cancels the AUTO mode. SUBARU recommends using the AUTO position. NOTE The air conditioner’s compressor does not operate with an outside tempera- ture of 32 F (0 C) or lower. & Temperature sensors Interior air temperature sensor...

  • Page 155: Lubrication Oil Circulation In The Refrigerant Circuit

    It is recommended that you have your filter checked or replaced by your SUBARU dealer. For replacement, use only a genuine SUBARU air filter kit. Replacement schedule: Every 12 months or 7,500 miles (12,000 km) whichever comes first...

  • Page 156: Replacing An Air Filter

    NOTE The filter can influence the air condi- tioning, heating and defroster perfor- mance if not properly maintained. & Replacing an air filter 1. Remove the glove box. (1) Open the glove box. (2) Remove the nine screws securing the glove box. Air filter cover 2.
  • Page 157 4-14 Climate control 5. Reinstall the glove box. 6. Close the glove box. Service label Caution label 7. LABEL installation (1) Fill out the information on the service label (small). (2) Attach the service label to the driver side door pillar and the caution label to the driver side end of the instrument panel.

  • Page 158: Audio

    Antenna system ... FM reception ... Installation of accessories... Audio set ... Type A audio set ... Type B audio set ... In-dash 6 CD auto changer (Optional audio unit – if equipped)... Type A audio set (if equipped) ... Radio operation...

  • Page 159: Antenna System

    If reception continues to be unsatisfactory, switch to a stronger station. Installation of accessories Always consult your SUBARU dealer before installing a citizen band radio or other transmitting device in your vehicle. Such devices may cause the electronic...

  • Page 160: Audio Set

    Audio set Your SUBARU may be equipped with one of the following audio sets. See the pages indicated in this section for operating details. & Type A audio set Radio operation: refer to page 5-4 Compact disc player operation: refer to...

  • Page 161: Type A Audio Set (If Equipped)

    Audio Type A audio set (if equipped) The radio will operate only when the ignition switch is in the “Acc” or “ON” position. & Radio operation (1) Power switch, Volume control, Tone/ Fader/Balance control dial (2) BAND button (3) Tuning buttons (4) Preset buttons (5) AUDIO button (6) SCAN button...
  • Page 162 mode is in the volume control.) Display Control mode Volume control Bass control Treble control Balance control Fader control Turn counterclockwise For less volume For less bass sound For less treble sound To increase left speaker volume and de- crease right speaker volume To increase rear speaker volume and decrease front speaker volume Audio...

  • Page 163: Seek Tuning

    Audio ! FM/AM band selection button (BAND) Push the “BAND” button when the radio is on to select FM1, FM2 or AM band reception. Each time this button is pressed, the band will change in the following order: The display indicates which one is cur- rently selected.

  • Page 164: Compact Disc Player Operation

    & Compact disc player operation Audio (7) Disc slot (8) CD button (9) Eject button (10) Fast-forwarding and track up button (11) Fast-reversing and track down button (12) Random button (13) Repeat button (14) Scan button (15) PWR (power) switch ! To play back a compact disc ! When CD is not in the player Hold a disc with a finger in the center hole...
  • Page 165 Audio ! When CD is in the player Press the “CD” button (8). The display will show “CD-IN” and the player will start playback. NOTE After the last song finishes, playback will automatically return to track 1 (the first song on the disc). ! To stop playback of a CD When the “PWR”...

  • Page 166: Cd Changer Control (If Optional In-Dash Cd Changer Is Connected)

    An optional CD changer can be connected to this audio unit. Consult the instructions that accompany the CD changer for operating the CD changer itself (e.g., how to load or unload CDs). See your SUBARU dealer for more information. Audio...
  • Page 167 5-10 Audio ! Selection of a desired disc You can select a desired disc from among the discs contained in the CD changer only by pressing the corresponding num- ber on one of the disc select buttons. If you are to listen to the 5th disc in the CD changer, press the “5”...

  • Page 168: Type B Audio Set (If Equipped)

    (only when playing MP3 or WMA)/channel selection (satellite radio*) when the “FM/AM”, “CD/AUX” and “SAT” are selected. (*: Use of satellite radio (Sirius) requires a tuner, antenna and a service contract. For details, please contact your SUBARU dealer.) – CONTINUED –...

  • Page 169: Sound Control

    5-12 Audio Display Control mode Bass control BASS Midrange control MIDDLE Treble control TREBLE Fader control FADER Balance control BALANCE Volume control VOLUME ! Sound control The dial (5) controls the Bass, Midrange, Treble, Balance and Fader when you select the appropriate sound control mode.

  • Page 170: Stereo Indicator

    ! Display illumination dimness can- cellation (BRIGHT) The brightness of the radio display dims when the light switch is in the “ ” or “ ” position. If this makes the display difficult to read, press the volume dial for more than 2 seconds to return the display to original brightness.
  • Page 171 5-14 Audio noise when the phone receives calls. This noise does not indicate a problem with the radio.

  • Page 172: Built-In Cd Changer Control

    & Built-in CD changer control 5-15 Audio (7) CD button (8) Eject button (9) Disc slot (10) Track selection buttons (11) Repeat/Random button (12) Disc number indicator (13) Load button (14) Folder selection dial (15) Disc selection buttons (16) Display button NOTE Make sure to always insert a disc with the label side up.
  • Page 173 5-16 Audio ! How to insert a CD(s) ! Inserting a CD 1. Briefly press the “LOAD” button (13). If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink.
  • Page 174 ! To select a track from its beginning ! Forward direction Briefly press the “ ” side of the button (10) to skip to the beginning of the next track. Each time the button is pressed, the indicated track number will increase. ! Backward direction Briefly press the “...
  • Page 175 If one of the following messages is displayed while operating the CD player, determine the cause based on the follow- ing information. If you cannot clear those messages, please contact your SUBARU dealer. ! When “PUSH EJECT” is displayed This message means that there is a mechanical error.
  • Page 176 Check that the disc type (i.e., 8 cm/3 inch CDs are not supported) and data format are correct. This player can only play MP3 and WMA data formats. If the disc cannot be unloaded or the message remains displayed, please contact your SUBARU dealer. – CONTINUED –...

  • Page 177: Auxiliary Unit And Satellite Radio Operation

    (22 Preset buttons (23) Channel selection dial (*: Use of satellite radio requires a tuner, antenna and a service contract. For de- tails, please contact your SUBARU deal- er.) NOTE For use of the In-dash CD changer, refer to the section of “In-dash 6 CD auto changer”...
  • Page 178 160 channels with the relevant subscription). Use of satellite radio (Sirius) requires a tuner, antenna and a service contract. For details, please contact your SUBARU dealer or visit Sirius Satellite Radio at www.sirius.com or call 1-888-539-SIRIUS (7474) for more information. Sirius, the...
  • Page 179 5-22 Audio with each press of the button. ! Channel preset Presetting a channel with a preset button (22) allows you to select that station in a single operation. Up to six SR1, SR2 and SR3 channels each may be preset. Press one of the preset buttons for at least 2 seconds to store the channel.

  • Page 180: In-Dash 6 Cd Auto Changer (If Equipped)

    In-dash 6 CD auto changer (if equipped) & Loading and unloading compact discs 5-23 Audio (1) Disc slot (2) Disc indicators (disc No.1 to 6) (3) Disc select buttons (disc No.1 to 6) (4) Eject button (5) Disc slot indicator –...
  • Page 181 5-24 Audio CAUTION Do not attempt to insert two or more discs into the slot at a time. Doing so can cause mechanical damage to the CD changer. Use only music CDs identified by mark. Do not use CDs listed in the following which could cause da- mage to the CD player.

  • Page 182: Function Control

    will begin to play. ! Disc indicators Lit: when the corresponding storage tray is occupied by a disc. Blinking: Disc player is either in loading, eject or changing mode. OFF: No disc is loaded or the ignition switch is in the “LOCK” position. ! Open/Closed disc slot indicator When the disc slot is open, the disc indicators on both sides of the slot...
  • Page 183 5-26 Audio normal operation. If this happens, eject the CD and wait for the player to dry out. Skipping may occur when the CD player is subjected to severe vibration (for example, when the vehicle is driven on a rough surface). To remove a disc from the case, press the center of the case and hold both edges of the disc.
  • Page 184 Interior lights ... Dome light ... Cargo area light ... Map lights ... Sun visors ... Vanity mirror ... Storage compartments ... Glove box ... Center console... Overhead console ... Dashboard storage compartment ... Convenience net ... Pocket (if equipped) ... Cup holders ...

  • Page 185: Interior Equipment

    Interior equipment Interior lights When leaving your vehicle, make sure the light goes out to avoid battery discharge. & Dome light The dome light switch has three positions: ON: The light stays on continuously. DOOR (middle position): The dome light comes on when any of the doors or the rear gate is opened.

  • Page 186: Map Lights

    Map lights To turn on the map light, push the switch. To turn it off, push the switch again. When leaving the vehicle, make sure the light is turned off to avoid battery dis- charge. Sun visors To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways.

  • Page 187: Storage Compartments

    Interior equipment Storage compartments CAUTION Always keep the storage com- partment closed while driving to reduce the risk of injury in the event of sudden stops or an accident. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.
  • Page 188 armrest and lock it in position by releasing the knob. Adjust the position of the armrest to suit your driving position. Make sure the armrest is securely retained. When you slide the armrest back to its original position, pull the knob upward as you do so.

  • Page 189: Overhead Console

    Interior equipment cur. Be careful not to trap your hands between the console top and console box when raising and tipping the console top. When there is an object on the console box lid, do not tip the console top forward. Otherwise, the console top or lid could be damaged, and an injury could occur.

  • Page 190: Pocket (If Equipped)

    & Pocket (if equipped) CAUTION Do not use the pocket as an ashtray or leave a lighted cigarette in the pocket. This could cause a fire. To use the pocket, push lightly on the lid below the climate controls. Cup holders CAUTION When not in use, always keep the cup holder stored while driving...

  • Page 191: In Center Console

    Interior equipment ! In center console A dual cup holder is built in the center console, beside the parking brake lever. & Rear passenger’s cup holder There are rear passenger’s cup holders at the back of the center console as well as on the reverse side of the console top.
  • Page 192 Power outlet in cargo area Accessory power outlets are provided beside the front pocket, in the center console and in the cargo area. Electrical power (12V DC) from the battery is available at any of the outlets when the ignition switch is in either the “Acc” or “ON” position.

  • Page 193: Use With A Cigarette Lighter (Canada Only, If Equipped)

    The electrical power socket lo- cated on the lower part of the instrument panel is originally de- signed to use a genuine SUBARU cigarette lighter plug. Do not use non-genuine cigarette lighter plugs in the socket. Doing so may cause a short-circuit and overheating, resulting in a fire.

  • Page 194: Ashtray (Canada Only, If Equipped)

    It is possible to install on ashtray, which is an optional accessory, in the front pocket. The ashtray is available from your SUBARU dealer. To open the ashtray, push lightly on the lid below the climate controls. Fully close the lid after using it to help reduce residual smoke.

  • Page 195: Floor Mat

    6-12 Interior equipment Floor mat A retaining pin is located on the driver’s side of the vehicle next to the fuel filler door release. The floor mat is secured using the built-in grommet, by placing the grommet over the pin and pushing downward. CAUTION Make sure the driver’s floor mat is placed back in its proper location...

  • Page 196: Cargo Area Cover (If Equipped)

    Cargo area cover (if equipped) The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo. & Using the cover To extend the cover, pull the end of the cover out of the housing, then insert its hooks into the catches as shown.

  • Page 197: Shopping Bag Hook

    6-14 Interior equipment Shopping bag hook CAUTION Do not hang items on the shopping bag hook that weigh 6.6 lbs (3 kg) or more. In the cargo area, there are two retract- able shopping bag hooks (one on each side) and four non-retractable shopping bag hooks (two on each side).

  • Page 198: Under-Floor Storage Compartment

    Under-floor storage compart- ment CAUTION Always keep the lids closed while driving to reduce the risk of injury in the event of sudden stop or an accident. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.

  • Page 199: Front, Left And Right Side Storage Compartment

    6-16 Interior equipment & Front, left and right side storage compartment To open the lid, raise the cargo tie-down hooks and pull the tab up. The jack and jack handle are stored in the left side storage compartment. & Center storage compartment (Storage bucket) To open the lid, pull the handle up.
  • Page 200 6-17 Interior equipment NOTE When storing a flat tire, put the storage tray in the luggage compartment (ex- cept Canada-spec. non-turbo models).
  • Page 201 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...

  • Page 202: Starting And Operating

    Fuel ... Fuel requirements ... Fuel filler lid and cap... State emission testing (U.S. only)... Preparing to drive ... Starting the engine... Manual transmission vehicle... Automatic transmission vehicle ... Stopping the engine... Manual transmission... Shifting speeds ... Driving tips ... Automatic transmission...

  • Page 203: Starting And Operating

    CHECK ENGINE warning light/Mal- function indicator lamp may turn on. If this happens, return to your authorized SUBARU Dealer for service. If it is determined that the condition is caused by the type of fuel used, repairs may not...

  • Page 204: Fuel Filler Lid And Cap

    SUBARU. In addition, some gasoline suppliers are now producing reformulated gasolines, which are designed to reduce vehicle emissions. SUBARU approves the use of reformulated gasoline. If you are not sure what the fuel contains, you should ask your service station...
  • Page 205 Starting and operating 1. To open the fuel filler lid, pull the lid release lever. The lever is on the floor at the left of the driver’s seat. WARNING Before opening the fuel filler cap, first touch the vehicle body or a metal portion of the fuel pump or similar object to discharge any static electricity that may be present...
  • Page 206 Paint damage caused by spilled fuel is not covered under the SUBARU Limited Warranty. Always use a genuine SUBARU fuel filler cap. If you use the wrong cap, it may not fit, and your fuel tank and emission con- trol system may be damaged.

  • Page 207: State Emission Testing (U.s. Only)

    At state inspection time, remember to tell your inspection or service station in advance not to place your SUBARU AWD vehicle on a two-wheel dynam- ometer. Otherwise, serious transmis- sion damage will result.

  • Page 208: Preparing To Drive

    Owners of rejected or failing vehicles should contact their SUBARU Dealer for service. Preparing to drive You should perform the following checks and adjustments every day before you start driving.

  • Page 209: Automatic Transmission Vehicle

    “START” position without depressing the accelerator pedal. (4) If the engine still refuses to start, contact your nearest SUBARU dealer for assistance. 6. Confirm that all warning and indicator lights have gone off after the engine has started.

  • Page 210: Stopping The Engine

    lights have gone out after the engine has started. The fuel injection system auto- matically lowers the idle speed as the engine warms up. While the engine is warming up, make sure that the selector lever is at the “P” or “N”...

  • Page 211: Recommended Shifting Speeds

    7-10 Starting and operating The shift pattern is shown on the shift lever knob. When shifting from 5th gear to reverse gear, first return the shift lever to the neutral position then shift into reverse gear. To change gears, fully depress the clutch pedal, move the shift lever, and gradually let up on the clutch pedal.

  • Page 212: Automatic Transmission

    When it is necessary to reduce vehicle speed due to slow traffic, turning corners, or driving up steep hills, downshift to a lower gear before the engine starts to labor. On steep downgrades, downshift the transmission to 4th, 3rd or 2nd gear as necessary;...

  • Page 213: Selector Lever For Automatic Transmission

    7-12 Starting and operating restored as the vehicle continues to be driven for a while. NOTE (non-turbo models only) To protect the engine while the “P” or “N” position is selected, the engine is controlled so that the engine speed does not become too high even if the accelerator pedal is fully depressed.
  • Page 214 NOTE If you stop the engine with the selector lever in the “N” position, move the selector lever to the “P” position immediately. Otherwise, you may find that the selector lever soon cannot be moved to the “P” position. If you find that the selector lever cannot be moved from the “N”...

  • Page 215: Maximum Speeds

    7-14 Starting and operating steep grade. In this position, the transmission holds in the 2nd gear. Use this position when starting off from a standstill on slippery road surfaces such as mud or snow. It will ensure greater traction. ! 1 (First) This position is for driving up or down very steep grades, or driving through mud or sand, or on slippery surfaces.

  • Page 216: Rear Viscous Limited Slip Differential (Lsd) (If Equipped)

    “N” position. 6. Remove the screwdriver from the hole. Depress the brake pedal and start the engine. Take your vehicle to the nearest SUBARU dealer immediately to have the system repaired. Rear viscous limited slip dif- ferential (LSD) (if equipped)

  • Page 217: Braking

    The disc brake pad wear warning indica- tors on the disc brakes give a warning noise when the brake pads are worn. If a squeaking or scraping noise is heard from the disc brakes while braking, im- mediately have your vehicle checked by your SUBARU dealer.

  • Page 218: Abs (Anti-Lock Brake System)

    ABS (Anti-lock Brake Sys- tem) WARNING Always use the utmost care in driving – overconfidence because you are driving with an ABS equipped vehicle could easily lead to a serious accident. CAUTION The ABS system does not always decrease stopping distance. You should always maintain a safe following distance from other vehicles.

  • Page 219: Electronic Brake Force Distribution (Ebd) System

    The warning light comes on dur- ing driving. If these occur, have the ABS system repaired at the first available oppor- tunity by your SUBARU dealer. NOTE If the warning light behavior is as described in the following, the ABS system may be considered normal.

  • Page 220: Steps To Take If Ebd System Fails

    3. Release the parking brake. If both warning lights go out, the EBD system may be faulty. Drive carefully to the nearest SUBARU dealer and have the system inspected. 4. If both warning lights come on again and stay illuminated after the engine has...

  • Page 221: Vehicle Dynamics Control System (If Equipped)

    Whenever suspension compo- nents, steering components, or an axle are removed from a vehicle equipped with Vehicle Dynamics Control, have an authorized SUBARU dealer per- form an inspection of that sys- tem. The following precautions should be observed in order to ensure...

  • Page 222: Vehicle Dynamics Control System Monitor

    NOTE Slight twitching of the brake pedal may be felt when the Vehicle Dynamics Control system operates; a small de- gree of vehicle or steering wheel shak- ing may also be noticed in this situa- tion. These are normal characteristics of Vehicle Dynamics Control operation and are no cause for alarm.
  • Page 223 SUBARU dealer carry out an inspection of those systems at the first available oppor- tunity. NOTE...

  • Page 224: Vehicle Dynamics Control Off Switch

    The following two situations could indicate malfunction of the Vehicle Dynamics Control system; if either should occur, have an authorized SUBARU dealer carry out an inspection of that system at the first available opportunity. The indicator light does not turn on when the ignition switch is turned to the “ON”...

  • Page 225: Tire Pressure Monitoring System (Tpms) (If Equipped)

    7-24 Starting and operating again, turn the ignition switch to the OFF position and restart the engine. When the switch is pressed to deactivate the Vehicle Dynamics Con- trol system, the vehicle’s running per- formance is comparable with that of a vehicle that does not have a Vehicle Dynamics Control system.

  • Page 226: Parking Your Vehicle

    This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting. Do not inject any tire liquid or...

  • Page 227: Parking Brake

    7-26 Starting and operating CAUTION Never drive while the parking brake is set because this will cause un- necessary wear on the brake lin- ings. Before starting to drive, always make sure that the parking brake has been fully released. &...

  • Page 228: Hill Holder (Manual Transmission - If Equipped)

    Hill holder (Manual transmis- sion – if equipped) CAUTION The Hill Holder is a device only for helping the driver to START the vehicle on an uphill grade. To pre- vent accidents when the vehicle is parked on a slope, be sure to firmly set the parking brake.

  • Page 229: Cruise Control

    7-28 Starting and operating Cruise control WARNING Do not use the cruise control under any of the following conditions. This may cause loss of vehicle control: driving up or down a steep grade driving on slippery or winding roads driving in heavy traffic Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is...

  • Page 230: To Temporarily Cancel The Cruise Control

    illuminated in the combination meter. The vehicle will maintain the desired speed. Vehicle speed can be temporarily in- creased while driving with the cruise control activated. Simply depress the accelerator pedal to accelerate the vehi- cle. When the accelerator pedal is re- leased, the vehicle will return to and maintain the previous cruising speed.
  • Page 231 7-30 Starting and operating ! To increase the speed (by accel- erator pedal) 1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Push the control lever downward in the “SET/COAST” direction once. Now the desired speed is set and the vehicle will keep running at that speed without de- pressing the accelerator pedal.

  • Page 232: Self-Leveling Rear Suspension (If Equipped)

    Self-leveling rear suspension (if equipped) The self-leveling suspension adjusts the vehicle body position automatically to keep it level at all times irrespective of the number of occupants and the amount of cargo. The self-leveling system is incorporated in the rear suspension shock absorber and operates only when the vehicle is in motion.
  • Page 233 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...
  • Page 234 New vehicle break-in driving – the first 1,000 miles (1,600 km) ... Fuel economy hints ... Engine exhaust gas (Carbon monoxide) ... Catalytic converter ... Periodic inspections ... Driving in foreign countries ... Driving tips for AWD vehicles ... Off road driving ... Winter driving ...

  • Page 235: Driving Tips

    Driving tips New vehicle break-in driving – the first 1,000 miles (1,600 The performance and long life of your vehicle are dependent on how you handle and care for your vehicle while it is new. Follow these instructions during the first 1,000 miles (1,600 km): Do not race the engine.

  • Page 236: Catalytic Converter

    exhaust fumes are entering the vehicle, have the probl em checked and corrected as soon as possible. If you must drive under these conditions, drive only with all windows fully open. Keep the rear gate closed while driving to prevent exhaust gas from entering the vehicle.

  • Page 237: Periodic Inspections

    Driving tips your vehicle checked and repaired by an authorized SUBARU dealer. Do not apply undercoating or rust prevention treatment to the heat shield of catalytic converter and the exhaust sys- tem. Do not drive with an extremely low fuel level.

  • Page 238: Driving Tips For Awd Vehicles

    By shifting power between the front and rear wheels, SUBARU AWD can also provide added traction during acceleration and added engine braking force during deceleration.

  • Page 239: Off Road Driving

    SUBARU can be driven on ordinary roads or off-road. But please keep in mind that an AWD SUBARU is a passenger car and is neither a conventional off-road vehicle nor an all-terrain vehicle. If you do take...

  • Page 240: Winter Driving

    “Warranty and Mainte- nance Booklet”. Remember that damage done to your SUBARU while operating it off-road and not using common sense precautions such as those listed above is not eligible for warranty coverage.

  • Page 241: Before Driving Your Vehicle

    Do not use engine antifreeze or other substitutes because they may damage the paint of the vehicle. SUBARU Windshield Washer Fluid con- tains 58.5% methyl alcohol and 41.5% surfactant, by volume. Its freezing tem- perature varies according to how much it is diluted, as indicated in the following table.

  • Page 242: Driving On Snowy And Icy Roads

    If your SUBARU is not going to be used for an extended period, it is best to have the fuel tank filled to capacity.

  • Page 243: Corrosion Protection

    8-10 Driving tips wiper blades (winter blades) during the seasons you could have snow and sub- zero temperatures. Blades of this type give superior wiping performance in snowy conditions. Be sure to use blades that are suitable for your vehicle. CAUTION During high-speed driving, non- freezing type wiper blades may not...

  • Page 244: Rocking The Vehicle

    easily lead to a serious accident. & Rocking the vehicle If you must rock the vehicle to free it from snow, sand, or mud, depress the accel- erator pedal slightly and move the selector lever back and forth between “D” and “R” repeatedly.

  • Page 245: Vehicle Capacity Weight

    8-12 Driving tips CAUTION Do not carry spray cans, containers with flammable or corrosive liquids or any other dangerous items inside the vehicle. NOTE For better fuel economy, do not carry unneeded cargo. & Vehicle capacity weight The load capacity of your vehicle is determined by weight, not by available cargo space.

  • Page 246: Roof Rail And Crossbar (If Equipped)

    pending on the situation. The GVWR equals Curb Weight (actual weight of your vehicle – including standard equipment, fluids, emergency tools and spare tire assembly) plus the vehicle capacity weight. In addition, the total weight applied to each axle (GAW) must never exceed the GAWR.
  • Page 247 8-14 Driving tips NOTE Remember that the vehicle’s center of gravity is altered with the weight of the load on the roof, thus affecting the driving characteristics. Drive carefully. Avoid rapid starts, hard cornering and abrupt stops. Crosswind effects will be increased. ! Removal and installation of the crossbars The crossbars can be removed when you...
  • Page 248 Load label Direction arrow label 6 in (150 mm) 3. With the front direction arrow label on the top right side of the crossbar pointing toward the front of the vehicle, carefully place the crossbar across the top of the vehicle so that the crossbar end supports rest on the top of the roof rails approxi- mately 6 inches (150 mm) rearward in the...

  • Page 249: Trailer Hitch (If Equipped)

    8-16 Driving tips Trailer hitch (if equipped) WARNING Never exceed the maximum weight specified for the trailer hitch. Exceeding the maximum weight could cause an accident resulting in serious personal in- juries. Permissible trailer weight changes depending on the situa- tion.

  • Page 250: When You Do Not Tow A Trailer

    Hitch ball installation point Hooks for safety chains 5. Use only a hitch ball that is appropriate for the ball mount and your trailer. The hitch ball must be securely installed on the ball mount. 6. Connect your trailer to the hitch ball. 7.

  • Page 251: Trailer Towing

    Seek the advice of your SUBARU dealer to assist you in purchasing a hitch and other necessary towing equipment appropriate for your vehicle. In addition, be sure to follow the...
  • Page 252 Model Conditions Maximum total trailer weight MT models When towing a 1,000 lbs (453 kg) trailer without brakes. When towing a 2,400 lbs trailer with brakes. (1,087 kg) AT models When towing a 1,000 lbs (453 kg) trailer without brakes. When towing a 2,400 lbs trailer with brakes.
  • Page 253 8-20 Driving tips ! Gross Axle Weight (GAW) and Gross Axle Weight Rating (GAWR) Gross Axle Weight The total weight applied to each axle (GAW) must never exceed the Gross Axle Weight Rating (GAWR). The front and rear GAWs can be adjusted by relocating passengers and luggage inside the vehi- cle.

  • Page 254: Trailer Hitches

    Choose a proper hitch for your vehicle and trailer. The use of a genuine SUBARU trailer hitch is recommended. A genuine SUBARU hitch is available from your SUBARU dealer. If use of a non-genuine hitch is unavoid- able, be sure the hitch is suited to your vehicle and trailer.

  • Page 255: Trailer Lights

    Check that your trailer’s brakes conform with Federal, state/province and/ or other applicable regulations. Your SUBARU’s brake system is not designed to be tapped into the trailer’s hydraulic brake system. Please ask your SUBARU dealer and professional trailer supplier for more information about the trailer’s brake...

  • Page 256: Trailer Towing Tips

    To ensure the trailer lights are connected properly, please consult your SUBARU dealer. Check for proper operation of the turn signals, the brake lights and parking lights each time you hitch up.

  • Page 257: Driving With A Trailer

    If the ABS warning light illuminates while the vehicle is in motion, stop towing the trailer and have repairs performed immediately by the nearest SUBARU dealer. ! Driving on grades Before going down a steep hill, slow...

  • Page 258: Forester Sports 2.5Xt Front Lip Spoiler (U.s. Only)

    mission, place the selector lever as follows: Uphill slopes: “D” position Downhill slopes: A low-speed gear posi- tion to use engine braking ! Parking on a grade Always block the wheels under both vehicle and trailer when parking. Apply the parking brake firmly. You should not park on a hill or slope.
  • Page 259 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...
  • Page 260 If you park your vehicle in an emergency... Temporary spare tire (if equipped) ... Flat tires... Changing a flat tire... Tire pressure monitoring system (TPMS) (if equipped)... Jump starting ... How to jump start... Engine overheating ... If steam is coming from the engine compartment...

  • Page 261: If You Park Your Vehicle In An Emergency

    This indicates the tire pressure monitoring system (TPMS) is un- able to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting.
  • Page 262 CAUTION Never use any temporary spare tire other than the original. Using other sizes may result in severe mechan- ical damage to the drive train of your vehicle. The temporary spare tire is smaller and lighter than a conventional tire and is designed for emergency use only.

  • Page 263: Flat Tires

    In case of emergency Flat tires If you have a flat tire while driving, never brake suddenly; keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place. & Changing a flat tire WARNING Do not jack up the vehicle on an incline or a loose road surface.
  • Page 264 2. Remove the storage compartment bucket (Canada spec. non-turbo models). 3. Remove the storage compartment tray (except Canada spec. non-turbo models). 4. Turn the attaching bolt counterclock- wise, then take spare tire out. 5. The jack is stored under the left side of the cargo floor.
  • Page 265 In case of emergency 7. Loosen the wheel nuts using the wheel nut wrench but do not remove the nuts. 8. Place the jack under the side sill at the front or rear jack-up point closest to the flat tire. Turn the jackscrew by hand until the jack head engages firmly into the jack-up point.

  • Page 266: Tire Pressure Monitoring System (Tpms) (If Equipped)

    the mounting surface of the wheel and hub with a cloth. 12. Put on the spare tire. Replace the wheel nuts. Tighten them by hand. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed.

  • Page 267: Jump Starting

    This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting. Do not inject any tire liquid or...

  • Page 268: How To Jump Start

    eye protectors, and remove metal objects such as rings, bands or other metal jewelry. Be sure the jumper cables and clamps on them do not have loose or missing insulation. Do not jump start unless cables in suitable condition are avail- able.

  • Page 269: In Case Of Emergency

    9-10 In case of emergency Booster battery Engine lifting bracket (1) Connect one jumper cable to the positive (+) terminal on the discharged battery. (2) Connect the other end of the jumper cable to the positive (+) term- inal of the booster battery. (3) Connect one end of the other cable to the negative (−) terminal of the booster battery.

  • Page 270: Engine Overheating

    This will cause the vehicle to spin away due to the operation or dete- rioration of the center differential. If towing is necessary, it is best done by your SUBARU dealer or a commercial towing service. Observe the following procedures for safety. – CONTINUED –...

  • Page 271: Towing And Tie-Down Hooks

    9-12 In case of emergency & Towing and tie-down hooks The towing hooks should be used only in an emergency (e.g., to free a stuck vehicle from mud, sand or snow). CAUTION Use only the specified towing hooks and tie-down hooks. Never use suspension parts or other parts of the body for towing or tie-down purposes.

  • Page 272: Using A Flat-Bed Truck

    & Using a flat-bed truck This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation. 1. Shift the selector lever into the “P” position for automatic transmission vehi- cles or “1st” for manual transmission vehicles.

  • Page 273: Rear Gate - If The Rear Gate Cannot Be Unlocked

    9-14 In case of emergency Rear gate – if the rear gate cannot be unlocked In the event that you cannot unlock the rear gate by operating the power door locking switches or the remote keyless entry system, you can unlock it from inside the cargo area.

  • Page 274: Maintenance Tools

    2. Insert a hex-head wrench in the end of the motor shaft. To close the moonroof, turn the wrench counterclockwise. Have your vehicle checked and repaired by an authorized SUBARU dealer. Maintenance tools Your vehicle is equipped with the following maintenance tools: Wheel nut wrench...
  • Page 275 9-16 In case of emergency For how to use the jack, refer to the “Flat tires” section in this chapter.

  • Page 276: Appearance Care

    Exterior care ... 10-2 Washing... Waxing and polishing ... Cleaning aluminum wheels ... Corrosion protection... 10-4 Most common causes of corrosion ... To help prevent corrosion... Cleaning the interior... 10-2 Seat fabric ... 10-3 Leather seat materials... 10-3 Synthetic leather upholstery... Ashtray (Canada only, if equipped) ...

  • Page 277: Exterior Care

    10-2 Appearance care Exterior care & Washing CAUTION When washing the vehicle, the brakes may get wet. As a result, the brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly pressing the brake pedal to heat up the brakes.

  • Page 278: Waxing And Polishing

    When in doubt, it is always best to contact your SUBARU dealer or an auto paint specia- list. NOTE Be careful not to block the windshield washer nozzles with wax when waxing the vehicle.

  • Page 279: Corrosion Protection

    Contact your SUBARU dealer to perform this kind of maintenance and treatment if you need assistance. Repair chips and scratches in the paint as soon as you find them.

  • Page 280: Cleaning The Interior

    If your SUBARU is to be parked for a long time in bright sunlight, it is recommended that the seats and headrests be covered, or the windows shaded, to prevent fading or shrinkage.

  • Page 281: Climate Control Panel, Audio Panel, Instrument Panel, Console Panel, Switches, Combination Meter, And Other Plastic Surfaces

    10-6 Appearance care brush or other narrow-ended implement. & Climate control panel, audio panel, instrument panel, console panel, switches, combination meter, and other plastic surfaces Use a soft, damp cloth to clean the climate control panel, audio equipment, instru- ment panel, center console, combination meter panel, and switches.

  • Page 282: Maintenance And Service

    Maintenance schedule ... Maintenance precautions... Before checking or servicing in the engine compartment... When you do checking or servicing in the engine compartment while the engine is running... Engine hood ... Engine compartment overview... Non-turbo models ... Turbo models ... Engine oil...
  • Page 283 Maintenance and service Replacement of brake pad and lining... Breaking-in of new brake pads and linings... Parking brake stroke... Tires and wheels ... Types of tires ... Tire pressure monitoring system (TPMS) (if equipped)... Tire inspection ... Tire pressures and wear ... Wheel balance...

  • Page 284: Maintenance Schedule

    Maintenance precautions When maintenance and service are re- quired, it is recommended that all work be done by an authorized SUBARU dealer. If you perform maintenance and service by yourself, you should familiarize yourself with the information provided in this section on general maintenance and service for your SUBARU.

  • Page 285: Before Checking Or Servicing In The Engine Compartment

    NEVER use a circuit tester for these wiring. If your SRS airbag or seatbelt pretensioner needs service, con- sult your nearest SUBARU deal- & Before checking or servicing in the engine compartment WARNING Always stop the engine and set the parking brake firmly to pre- vent the vehicle from moving.
  • Page 286 3. Release the secondary hood release located under the front grille by moving the lever toward the left. Lift up the hood, release the hood prop from its retainer and put the end of the hood prop into the slot in the hood. To close the hood: 1.

  • Page 287: Engine Compartment Overview

    11-6 Maintenance and service Engine compartment overview & Non-turbo models Air cleaner element (page 11-15) Manual transmission oil level gauge (MT) (page 11-19) or Differential gear oil level gauge (AT) (page 11-21) Clutch fluid reservoir (page 11-26) Automatic transmission fluid level gauge (page 11-20) Brake fluid reservoir (page 11-25) Fuse box (page 11-43)

  • Page 288: Turbo Models

    & Turbo models 11-7 Maintenance and service Air cleaner element (page 11-15) Manual transmission oil level gauge (MT) (page 11-19) or Differential gear oil level gauge (AT) (page 11-21) Clutch fluid reservoir (page 11-26) Automatic transmission fluid level gauge (page 11-20) Brake fluid reservoir (page 11-25) Fuse box (page 11-43) Battery (page 11-42)

  • Page 289: Engine Oil

    1 quart per 1,200 miles or 1 liter per 2,000 kilometers, we recommend that you contact your SUBARU dealer. & Checking the oil level Check the engine oil level at each fuel stop.

  • Page 290: Changing The Oil And Oil Filter

    Be careful not to spill engine oil when adding it. If oil touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If engine oil gets on the exhaust pipe, be sure to wipe it off. If you check the oil level just after stopping the engine, wait a few minutes for the oil to drain back into the oil pan before checking...

  • Page 291: Recommended Grade And Viscosity

    11-10 Maintenance and service 7. Remove the oil filter with an oil filter wrench. 8. Before installing a new oil filter, apply a thin coat of engine oil to the seal. 9. Clean the rubber seal seating area of the bottom of engine and install the oil filter by hand turning.

  • Page 292: Recommended Grade And Viscosity Under Severe Driving Conditions

    When adding oil, different brands may be used together as long as they are the same API classification and SAE viscosity as those recommended by SUBARU. SAE viscosity number and applicable temperature 5W-30 is recommended. Engine oil viscosity (thickness) affects fuel economy.

  • Page 293: Cooling System

    Subaru Genuine Coolant, which is specifically formulated for the Subaru cool- ing system. Failure to use Subaru Genuine Coolant along with Subaru Cooling System Condi- tioner at the recommended main- tenance intervals may result in...
  • Page 294 The alcohol contained in the engine coolant may damage the paint surface. ! Changing the coolant Always add genuine Subaru cooling sys- tem conditioner whenever the coolant is replaced. Change the engine coolant and add genuine Subaru cooling system condi- tioner using the following procedures according to the maintenance schedule.
  • Page 295 Fill up to this level 5. Slowly pour the coolant and fill up to just below the filler neck, allowing enough room to add genuine Subaru cooling system conditioner in the radiator. Add genuine Subaru cooling system condi- tioner until the coolant level reaches the filler neck.

  • Page 296: Air Cleaner Element

    & Replacing the air cleaner element Replace the air cleaner element according to the maintenance schedule in the “Warranty and Maintenance Booklet”. Un- der extremely dusty conditions, replace it more frequently. It is recommended that you always use genuine SUBARU parts. – CONTINUED –...

  • Page 297: Non-Turbo Models

    11-16 Maintenance and service ! Non-turbo models 1. Unsnap the two clamps holding the air cleaner case cover. 2. Push the air cleaner case cover in the direction of the arrow shown in the drawing. Air cleaner case cover Viscous air cleaner element Dry air cleaner element (if required) 3.

  • Page 298: Spark Plugs

    It may be difficult to replace the spark plugs. It is recommended that you have the spark plugs replaced by your SUBARU dealer. The spark plugs should be replaced according to the maintenance schedule in the “Warranty and Maintenance Book- let”.

  • Page 299: Recommended Spark Plugs

    22 lbs (98 N, 10 kg) midway between the pulleys by using a spring scale. Belt deflection should be the amount specified. If a belt is loose, cracked, or worn, contact your SUBARU dealer. in (mm) Deflection...

  • Page 300: Manual Transmission Oil

    Manual transmission oil & Checking the oil level Non-turbo models: Yellow handle Turbo models Check the oil level monthly. 1. Park the vehicle on a level surface and stop the engine. 2. Pull out the dipstick, wipe it clean, and insert it again.

  • Page 301: Recommended Grade And Viscosity

    11-20 Maintenance and service & Recommended grade and viscosity Each oil manufacturer has its own base oils and additives. Never use different brands together. Oil grade: API classification GL-5 SAE viscosity No. and applicable tempera- ture Automatic transmission fluid & Checking the fluid level The automatic transmission fluid expands largely as its temperature rises;...

  • Page 302: Recommended Fluid

    & Recommended fluid Use one of the following types of auto- matic transmission fluid. Genuine Subaru Automatic Transmis- sion Fluid Type-HP IDEMITSU ATF HP Castrol Transmax J NOTE For optimum transmission perfor-...

  • Page 303: Recommended Grade And Viscosity

    11-22 Maintenance and service Upper level Lower level 3. Pull out the dipstick again and check the oil level on it. If it is below the lower level, add oil to bring the level up to the upper level. CAUTION Be careful not to spill front differ- ential gear oil when adding it.

  • Page 304: Recommended Grade And Viscosity

    If the vehicle requires frequent refilling, there may be an oil leak. If you suspect a problem, have the vehicle checked at your SUBARU dealer. & Recommended grade and viscosity Each oil manufacturer has its own base oils and additives. Never use different brands together.

  • Page 305: Power Steering Fluid

    3. If the fluid level is lower than the applicable “MIN” line, add the recom- mended fluid as necessary to bring the level between the “MIN” and “MAX” line. If the fluid level is extreme low, it may indicate possible leakage. Consult your SUBARU dealer for an inspection.

  • Page 306: Recommended Fluid

    If the vehicle requires frequent refilling, there may be a leak. If you suspect a problem, have the vehicle checked at your SUBARU dealer. CAUTION Never use different brands of brake fluid together. Also, avoid...

  • Page 307: Recommended Brake Fluid

    If the vehicle requires frequent refilling, there may be a leak. If you suspect a problem, have the vehicle checked at your SUBARU dealer. Never use different brands of clutch fluid together. When clutch fluid is added, be careful not to allow any dirt into the tank.

  • Page 308: Recommended Clutch Fluid

    2 lbs (10 N, 1 kg). If the free play is not within proper specification, contact your SUBARU deal- – CONTINUED –...

  • Page 309: Clutch Pedal (Mt Vehicles)

    0.15 – 0.44 in (4 – 11 mm) Lightly press the clutch pedal down with your finger until you feel resistance, and check the free play. If the free play is not within proper specification, contact your SUBARU deal-...

  • Page 310: Hill Holder (Mt Vehicles - If Equipped)

    If you hear this scraping noise each time 11-29 Maintenance and service you apply the brake pedal, have the brake pads serviced by your SUBARU dealer as soon as possible. & Breaking-in of new brake pads and linings When replacing the brake pad or lining, use only genuine SUBARU parts.

  • Page 311: Parking Brake Stroke

    44 lbs, 196 N, 20 kg). If the parking brake lever stroke is not within the specified range, have the brake system checked and adjusted at your SUBARU dealer. Tires and wheels & Types of tires You should be familiar with type of tires present on your vehicle.

  • Page 312: Tire Pressure Monitoring System (Tpms) (If Equipped)

    In this event, go to a SUBARU dealer to have the system inspected as soon as possible. While the vehicle is driven, friction be- tween tires and the road surface causes the tires to warm up.

  • Page 313: Tire Inspection

    Tire Pressure Monitoring System checked at a SUBARU dealer as soon as possi- ble. If this light comes on while driving, never brake suddenly and keep driving straight ahead while gradu- ally reducing speed.

  • Page 314: Tire Pressures And Wear

    Drive slowly to the nearest authorized SUBARU dealer and have the vehicle inspected. & Tire pressures and wear Maintaining the correct tire pressures helps to maximize the tires’...

  • Page 315: Wheel Balance

    If you suspect that the wheels are not correctly balanced, have them checked and adjusted by your SUBARU dealer. Also have them adjusted after tire repairs and after tire rotation. NOTE...

  • Page 316: Wear Indicators

    mance. & Wear indicators New tread Worn tread Tread wear indicator Each tire incorporates a tread wear indicator, which becomes visible when the depth of the tread grooves decreases to 0.063 in (1.6 mm). A tire must be replaced when the tread wear indicator appears as a solid band across the tread.

  • Page 317: Tire Replacement

    You are advised to replace the tires with new ones that are identical to those fitted as standard equip- ment. For safe vehicle operation, SUBARU recommends replacing all four tires at the same time. WARNING All four tires must be the same in...

  • Page 318: Aluminum Wheels (If Equipped)

    When wheel nuts, balance weights, or the center cap is replaced, be sure to replace them with genuine SUBARU parts designed for aluminum wheels. 11-37 Maintenance and service...
  • Page 319 In areas where water freezes in winter, use an anti-freeze type windshield washer fluid. SUBARU Windshield Washer Fluid contains 58.5% methyl alcohol and 41.5% surfactant, by volume. Its freezing tem- perature varies according to how much it is diluted, as indicated in the following table.

  • Page 320: Replacement Of Wiper Blades

    Replacement of wiper blades Grease, wax, insects, or other material on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove the streaks after operating the windshield washer or if the wiper operation is jerky, clean the outer surface of the windshield (or rear window) and the wiper blades using a...

  • Page 321: Rear Window Wiper Blade

    11-40 Maintenance and service Metal spines 4. If the new blade rubber is not provided with two metal spines, remove the metal spines from the old blade rubber and install them in the new blade rubber. 5. Align the claws of the metal support with the grooves in the rubber and slide the blade rubber assembly into the metal support until it locks.
  • Page 322 3. Having turned the wiper blade assem- bly to the angle shown in the illustration, pull it in the direction of the arrow to remove it from the wiper arm. Plastic support 4. Pull out the end of the blade rubber assembly to unlock it from the plastic support.

  • Page 323: Battery

    11-42 Maintenance and service support as shown in the illustration. If the rubber is not retained properly, the wiper may scratch the rear window glass. 8. Install the wiper blade assembly to the wiper arm. Make sure that it locks in place. 9.

  • Page 324: Fuses

    Upper level Lower level It is unnecessary to periodically check the battery fluid level or periodically refill with distilled water. However, if the battery fluid level is below the lower level, remove the cap. Fill to the upper level with distilled water. Fuses CAUTION Never replace a fuse with one hav-...

  • Page 325: Main Fuse

    6. If the same fuse blows again, this indicates that its system has a problem. Contact your SUBARU dealer for repairs. Main fuse Main fuse box The main fuses are designed to melt...

  • Page 326: Installation Of Accessories

    11-45 Maintenance and service Installation of accessories Always consult your SUBARU dealer before installing fog lights or any other electrical equipment in your vehicle. Such accessories may cause the electronic system to malfunction if they are incor- rectly installed or if they are not suited for...

  • Page 327: Replacing Bulbs

    11-46 Maintenance and service Replacing bulbs...
  • Page 328 High beam headlight Low beam headlight Vehicle with HID headlights Vehicle without HID headlights Front turn signal light Map light Dome light Side marker light (Front) Front fog light Parking light High mount stop light Cargo area light Tail/stop light Backup light Rear turn signal light Tail/stop light...

  • Page 329: Headlights (Vehicle With Hid Headlights)

    NOTE If headlight aiming is required, con- sult your SUBARU dealer for proper adjustment of the headlight aim. It may be difficult to replace the bulbs. Have your SUBARU dealer re- place the bulbs if necessary.
  • Page 330 2. Remove the retainer spring, then pull out the bulb and electrical connector unit. 3. Disconnect the electrical connector from the bulb. 4. Install a new bulb into the electrical connector, then set the retainer spring securely. 5. Install the bulb cover. ! High beam light bulbs 1.

  • Page 331: Rear Combination Lights

    11-50 Maintenance and service & Rear combination lights 1. Remove the upper and lower screws. Then, slide the rear combination lamp assembly to the rear and remove it from the vehicle. Tail/stop light Backup light Rear turn signal light Tail/stop light 2.

  • Page 332: Dome Light And Map Light

    2. Pull the bulb from the socket. Install a new bulb. 3. Reinstall the cover. 4. Tighten the mounting screws then reinstall the covers. NOTE Other bulbs may be difficult to replace. Have your SUBARU dealer replace these bulbs if necessary. 11-51 Maintenance and service...
  • Page 333 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...
  • Page 334 Specifications ... 12-2 Dimensions... Engine ... Electrical system... Capacities ... Tires ... Wheel alignment ... Fuses and circuits ... 12-2 Fuse panel located behind the instrument panel ... 12-3 Fuse panel located in the engine 12-3 compartment ... 12-4 Bulb chart... 12-5 Vehicle identification ...

  • Page 335: Specifications

    12-2 Specifications Specifications These specifications are subject to change without notice. & Dimensions Item Drive system Transmission type Overall length Overall width Overall height Wheel base Tread Front Rear Ground clearance* *1: Measured with vehicle empty AT: Automatic transmission MT: Manual transmission 2.5-liter non-turbo models 176.6 (4,485) 68.3 (1,735)

  • Page 336: Engine

    & Engine Engine model Engine type Displacement cc (cu-in) Bore Stroke in (mm) Compression ratio Firing order & Electrical system Battery type and capacity (5HR) MT models AT models Alternator 2.5-liter non-turbo models 2.5-liter turbo models Spark plugs 2.5-liter non-turbo models 2.5-liter turbo models EJ253 (2.5-liter, SOHC, non-turbo) Horizontally opposed, liquid cooled 4 cylinder, 4 stroke gasoline engine...

  • Page 337: Capacities

    12-4 Specifications & Capacities Fuel tank Engine oil Transmission oil Front differential gear oil (AT) Rear differential gear oil Power steering fluid Engine coolant AT: Automatic transmission MT: Manual transmission 2.5-liter non-turbo models 2.5-liter turbo models 15.9 US gal (60 liters, 13.2 Imp gal) 4.2 US qt (4.0 liters, 3.5 Imp qt) 3.7 US qt (3.5 liters, 3.1 Imp qt) 9.8 US qt (9.3 liters, 8.2 Imp qt)

  • Page 338: Tires

    & Tires Tire size Wheel size Pressure Front Rear Temporary Size spare tire Pressure NOTE For the Canada specification non-turbo models, there is a conventional tire installed under the floor of the cargo area. For the temporary spare tire, T135/80D16 or T135/90D16 is equipped to the vehicle. &...

  • Page 339: Fuses And Circuits

    12-6 Specifications Fuses and circuits & Fuse panel located behind the instrument panel Fuse Fuse Circuit panel rating Heater fan Heater fan Power door lock Remote keyless entry Power outlet (front) Remote controlled rear view mirrors Tail light Parking light SRS airbag Fog light Vehicle Dynamics Con-...
  • Page 340 Fuse Fuse Circuit panel rating Meter Windshield wiper and washer Brake light Air conditioner Backup light Cruise control Power outlet (cargo) Rear window wiper and washer Ignition coil (non-turbo model only) Seat heater Empty 12-7 Specifications – CONTINUED –...

  • Page 341: Fuse Panel Located In The Engine Compartment

    12-8 Specifications & Fuse panel located in the engine compartment FWD socket (AT models without Vehicle Dynamics Control system) Main fuse Fuse Fuse Circuit panel rating Radiator cooling (main) Radiator cooling (sub) Vehicle Dynamics Con- trol system (models with Vehicle Dynamics Con- trol system only) ABS motor Engine sensor (non-turbo...

  • Page 342: Bulb Chart

    Fuse Fuse Circuit panel rating Secondary air combina- tion valve (turbo models only) Bulb chart Description Wattage Headlight High beam 12V-60W Low beam Vehicle with HID headlights 12V-35W Vehicle without HID head- 12V-55W lights Front fog light 12V-51W Front turn signal light 12V-21W 12V-5W Parking light...

  • Page 343: Specifications

    12-10 Specifications Vehicle identification Vehicle identification number Emission control label Vehicle identification number plate Tire inflation pressure plate Certification label Bar code label (U.S. only) Model number label Radio noise label (Canada only) Fuel label...

  • Page 344: Consumer Information And Reporting Safety Defects

    Consumer information and Reporting safety defects For U.S.A..13-2 Tire information ... 13-2 Tire labeling ... Recommended tire inflation pressure... Glossary of tire terminology ... Tire care – maintenance and safety practices... Vehicle load limit – how to determine... Determining compatibility of tire and vehicle load capacities ...

  • Page 345: Tire Information

    13-2 Consumer information and Reporting safety defects For U.S.A. The following information has been compiled according to Code of Federal Regulations “Title 49, Part 575”. Tire information & Tire labeling Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed on the sidewall of a tire by tire manufacturers.

  • Page 346: Other Markings

    Example: (6) Load Index: A numerical code which specifies the maximum load a tire can carry at the speed indicated by its speed symbol, at maximum inflation pressure. For example, “94” means 1,477 lbs (670 kg). WARNING Load indices apply only to the tire, not to the vehicle.

  • Page 347: Uniform Tire Quality Grading

    13-4 Consumer information and Reporting safety defects ! Maximum load rating The load rating at the maximum permissible weight load for this tire. For example, “MAX. LOAD 670 kg (1477 LBS) @ 300 kpa (44 PSI) MAX. PRESS.” WARNING Maximum load rating applies only to the tire, not to the vehicle.

  • Page 348: Recommended Tire Inflation Pressure

    & Recommended tire inflation pressure ! Recommended cold tire inflation pressure Recommended cold tire inflation pressure for your vehicle’s tires is as follows, Tire size Wheel size Pressure Front Rear Temporary spare tire Size Pressure NOTE For the temporary spare tire, T135/80D16 or T135/90D16 is equipped to the vehicle. Consumer information and Reporting safety defects P215/60R16 94H JJ or 16...

  • Page 349: Glossary Of Tire Terminology

    13-6 Consumer information and Reporting safety defects ! Vehicle placard The vehicle placard is affixed to the driver’s side door pillar. Example: The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded vehicle weight, seating capacity and loading infor- mation.

  • Page 350: Tire Care - Maintenance And Safety Practices

    whitewall, bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other side- wall of the tire, or The outward facing sidewall of an asymmetrical tire that has a particular side that must al- ways face outward when mount- ing on a vehicle.

  • Page 351: Vehicle Load Limit - How To Determine

    13-8 Consumer information and Reporting safety defects tires every 7,500 miles (12,000 km). Rotating the tires involves switch- ing the front and rear tires on the right-hand side of the vehicle and similarly switching the front and rear tires on the left-hand side of the vehicle.
  • Page 352 Calculate the available load ca- pacity by subtracting the total weight from the vehicle capacity weight of 900 lbs (408 kg). The result of step 2 shows that a further 84 lbs (38 kg) of cargo can be carried. Consumer information and Reporting safety defects Example 1B For example, if a person weighing 176 lbs (80 kg) now enters the...
  • Page 353 13-10 Consumer information and Reporting safety defects with the statement “The combined weight of occupants and cargo should never exceed 408 kg or 900 lbs”. For example, the vehicle has one occupant weighing 165 lbs (75 kg) plus cargo weighing 375 lbs (170 kg).

  • Page 354: Determining Compatibility Of Tire And Vehicle Load Capacities

    The total weight now exceeds the capacity weight by 32 lbs (15 kg), so the cargo weight must be reduced by 32 lbs (15 kg) or more. & Determining compatibility of tire and vehicle load capaci- ties The sum of four tires’ maximum load ratings must exceed the max- imum loaded vehicle weight (“GVWR”).

  • Page 355: Uniform Tire Quality Grading Standards

    13-12 Consumer information and Reporting safety defects able cargo and luggage load capa- city is 650 lbs. (1,400 − 750 (5 150) = 650 lbs.) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calcu- lated in Step 4.

  • Page 356: Temperature A, B, C

    cified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor- mance. WARNING The traction grade assigned to this tire is based on straight- ahead braking traction tests, and does not include accel- eration, cornering, hydroplan- ing, or peak traction charac- teristics.

  • Page 357: Reporting Safety Defects (Usa)

    However, NHTSA cannot become involved in individual problems between you, your dealer, or Subaru of America, Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov;...

  • Page 358: Index

    Index...
  • Page 359 14-2 Index ABS (Anti-lock Brake System) ... 7-17 Warning light ... 3-13, 7-17 Accessories... 5-2, 11-45 Accessory power outlet... 6-8 Active head restraint... 1-6 Air cleaner element ... 11-15 Air conditioner ... 4-7 Air filtration system... 4-12 Air flow selection... 4-2 Alarm system ...
  • Page 360 Catalytic converter ... 8-3 Center Console ... 6-4 Ventilators ... 4-3 Center and side ventilators... 4-3 Changing Flat tire ... 9-4 Oil and oil filter ... 11-9 Charge warning light ... 3-12 CHECK ENGINE warning light/Malfunction indicator lamp ... 3-12 Checking Brake pedal free play ...
  • Page 361 14-4 Index Locks ... 2-4 Open warning light ... 3-16 Drive belts... 11-18 Driving All-Wheel Drive vehicle ... 3-16 Car phone/cell phone ... 7 Drinking ... 6 Drugs ... 6 Foreign countries ... 8-4 Pets ... 7 Snowy and icy roads ... 8-9 Tips...
  • Page 362 Hazard warning flasher ... 3-6, 9-2 Head restraint adjustment ... 1-6 Rear... 1-8 Headlight Beam leveler ... 3-23 Flasher ... 3-21 Headlights... 3-20, 11-48 Heater operation ... 4-5 High beam indicator light ... 3-17 High mount stop light... 11-51 High/low beam change (dimmer)... 3-21 Hill holder (MT vehicles) ...
  • Page 363 14-6 Index LSD (Limited slip differential) ... 7-15 Lumbar support ... 1-5 Main fuse... 11-44 Maintenance Precautions ... 11-3 Schedule ... 11-3 Seatbelt ... 1-19 Tools ... 9-15 Malfunction indicator lamp... 3-12 Manual Climate control system ... 4-3 Seat ... 1-3 Transmission ...
  • Page 364 Viscous limited slip differential ... 7-15 Rear differential Gear oil ... 11-22 Rear seat Folding down... 1-9 Rear window Defogger button ... 3-28 Wiper and washer switch ... 3-26 Wiper blades ... 11-40 Recommended Automatic transmission fluid ... 11-21 Brake fluid... 11-26 Clutch fluid ...
  • Page 365 14-8 Index Specifications ... 12-2 Speedometer... 3-6 Frontal airbag ... 1-39 Side airbag ... 1-51 SRS airbag (Supplemental Restraint System airbag) ... 4, 1-35 SRS airbag system Monitors... 1-56 Servicing... 1-57 Warning light ... 3-10 Starting the engine ... 7-7 State emission testing (U.S.
  • Page 366 Capacity weight ... 8-12 Identification ... 12-10 Symbols ... 3 Vehicle Dynamics Control OFF indicator light... 3-14 OFF switch ... 7-23 Operation indicator light ... 3-16 System ... 7-20 Warning light ... 3-14, 7-22 Ventilator ... 4-2 Warning and indicator lights ... 3-9 Warning light ABS ...
  • Page 367 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...
  • Page 368 134...
  • Page 369 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...

  • Page 370: Gas Station Reference

    & Fuel ! Non-turbo models Use only unleaded gasoline with an octane rating of 87 AKI or higher. ! Turbo models Use premium unleaded gasoline with an octane rating of 91 AKI or higher. If premium unleaded gasoline is not available, regular unleaded gasoline with octane rating of 87 AKI or higher may be temporarily used.
  • Page 371 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...

This manual is also suitable for:

Forester 2008

Table of Contents