Table of Contents
Advertisement
Directions for use
Pair a smartphone, a tablet, or a communication hub with the monitor
Advanced Bluetooth 4.0 technology enables your smartphone, your tablet, or a
communication hub to receive your personal health information from your blood pressure
monitor. You have two alternatives to pair the monitor with these devices:
•
Contact your Remote Patient Monitoring Solution provider or use the instructions
that office provided to set up these communications devices.
•
If you are using the Welch Allyn app, follow the pairing instructions presented in the
app.
With either alternative, you complete the same steps on the monitor:
1. Confirm that smartphone, tablet, or communication hub is powered on and in
discoverable mode (ready for pairing).
Note
2. Press and hold the Power button on the blood pressure monitor for 2 seconds to
power on the device and activate Bluetooth pairing.
The Bluetooth symbol flashes while discovering the monitor.
If successful, a steady
screen. If unsuccessful, the
Position the blood pressure cuff
To achieve an accurate blood pressure reading, follow these steps to position the blood
pressure cuff properly.
1. Remove any sleeves covering your upper arm.
Note
2. Place the cuff loosely over your arm so that the blood pressure tube extends down
over your hand.
Bluetooth wireless connectivity is only available for devices
which support Bluetooth 4.0 technology.
symbol surrounded by a dotted line appears on the LCD
appears.
The preferred site for taking a blood pressure measurement
is your bare upper arm.
Measuring blood pressure
13
Hide quick links:
Advertisement
Table of Contents
