Advanced Pip - Panasonic TH-42PG10M Operating Instructions Manual

Advanced PIP

1
2
3
4
5
6
(When Advanced PIP is On)
7
Note:
To use , ,
Notes:
• Advanced PIP corresponding signal
Sub screen
NTSC, PAL, SECAM (tuner, video)
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i,
1125/50i, 1250/50i (Component Video, RGB, DVI, SDI,
HDMI)
• If "INPUT lock" in Options menu is set to other than "Off", MULTI PIP function isn't available.
• Sound output is from the picture which is selected in Audio Out (PIP) (See page 25).
• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of
the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals
displayed on the main picture and depending on the 2-picture display mode.
• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
• Computer screen picture is displayed in a simplifi ed format, and it may not be possible to discern details on them satisfactorily.
• Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
• Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
Press to display the Setup menu.
Press to select "OSD Language".
Press and hold until the Options menu is displayed.
Press to select Advanced PIP.
Press to adjust the
menu.
Off : Sets normal
two screen
display mode
(see page 20).
On : Sets Advanced
PIP mode.
Press to exit from
Options menu.
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed as above.
, buttons for the screen operations, follow the procedures in the previous page.
TH-42PG10M, TH-42PG10A
Options
Enable
Off-timer function
Onscreen display
Initial INPUT
Off
Initial VOL level
Off
Maximum VOL level
INPUT lock
Studio W/B
Advanced PIP
Display size
One screen Advanced PIP
1
Sub screen Main screen
6
640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,
1366x768@60Hz (RGB, DVI, HDMI)
1280x768@60Hz (DVI)
TH-37PR10M, TH-42PR10M,
TH-37PR10A, TH-42PR10A
1/3 Options
Weekly Command Timer
Onscreen display
On
Off Initial INPUT
0 Initial VOL level
0
Maximum VOL level
Off INPUT lock
Off Button lock
Off
Remocon User level
Off
Advanced PIP
2
5
Main screen
1/3
On
Off
Off 0
Off 0
Off
Off
Off
Off
3
4
21