Setup Of Screensaver Time; Reduces Screen Image Retention - Panasonic TH-42PG10M Operating Instructions Manual

Screensaver (For preventing image retention)

Setup of Screensaver Time

After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when "Mode" is "On" or "Off".)
Screensaver
PRESENT TIME 15:10
Start
Function
Time Designation
Mode
Start Time
Finish Time
Side panel
Wobbling
Peak limit
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
Screensaver
PRESENT TIME 15:10
Start
White bar scroll
Function
Time Designation
Mode
Start Time
Finish Time
Side panel
Wobbling
Peak limit
Note: Timer function will not work unless "PRESENT TIME" is set.

Reduces screen image retention

These functions prevent the occurrence of an "image retention" on the display when turned ON.
Wobbling: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of
sharper contour of image.
On1: Shifts the image every 30 seconds.
On2: Shifts the image at a dot level pitch depending on screen-detection.
Peak limit: Suppresses image contrast (peak brightness).
Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 46)
1
2
3
30
Screensaver
White bar scroll
Function
Mode
6:15 Periodic Time
12:30
Operating Time
High Side panel
Wobbling
Off
Off Peak limit
Press to select Start Time / Finish Time
(When Time Designation is selected).
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to setup.
button: Forward
button: Back
Screensaver
PRESENT TIME 15:00
Start
Function
Mode
0:00
Periodic Time
0:00 Operating Time
High Side panel
Off Wobbling
Off Peak limit
Press to display the Setup menu.
Press to select "Screensaver".
Press to display Screensaver menu.
Press to select "Wobbling" or "Peak limit".
Press to select "On1", "On2" or "Off" (Wobbling).
"On" or "Off" (Peak limit).
PRESENT TIME 15:00
Start
White bar scroll
Interval
12:00
3:00
High
Off
Off
White bar scroll
Interval
0:00
0:00
High
Off
Off
Screensaver
PRESENT TIME 99:99
Start
White bar scroll
Function
Off
Mode
Start Time 6:15
12:30
Finish Time
Side panel High
Wobbling
Off
Peak limit Off
Screensaver
PRESENT TIME 15:00
Start
White bar scroll
Function
Time Designation
Mode
Start Time
Finish Time
Side panel
Wobbling
Peak limit
Screensaver
PRESENT TIME 15:00
Start
White bar scroll
Function
Interval
Mode
Periodic Time
Operating Time
Side panel
Wobbling
Peak limit
Setup
Screensaver
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Screensaver
PRESENT TIME 99:99
Start
White bar scroll
Function
Off
Mode
Start Time
Finish Time
Side panel
Wobbling
Peak limit
6:15
12:30
High
Off
Off
12:00
3:00
High
Off
Off
2/2
6:15
12:30
High
Off
Off