Removing And Installing The Top - Gigabyte G482-Z50 User Manual

3-12 Removing and Installing the Top Front Cover
Skip this section if you are not going to replace the PCIe RAID card.
• The image below shows the Top Front Cover removal process for G482-Z50. The same process
applies to G482-Z51.
Follow these instructions to remove the top front cover:
1. Remove the three screws securing the cover.
2. Slide the cover towards the rear and remove the cover in the direction indicated.
3. Reverse the previous steps to install the top front cover.
1
System Hardware Installation
2
1
1
2
- 46 -