Removing And Installing The Chassis Top Cover - Gigabyte S453-S70-AAV1 User Manual

3-1

Removing and Installing the Chassis Top Cover

Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove/install the chassis top cover:
1. Remove the screw securing the chassis cover.
2. Push down on the indentations located on the side of the chassis cover.
3. Slide the cover towards the rear and remove the cover in the direction indicated.
4. Follow steps 1-3 in reverse order to re-install the top cover
2
System Hardware Installation
- 25 -
3
1
2