Table of Contents
Advertisement
3-9-2 G482-Z51
Follow these instructions to install a 2.5" hard disk drive:
1.
Press the release button.
2.
Extend the locking lever.
3.
Pull the locking lever to remove the HDD tray.
4.
Align the hard disk drive with the blank HDD tray.
5.
Slide the hard drive into the blank HDD tray in the indicated direction.
6.
Make sure the hard drive is secured in the HDD tray.
Slide the hard drive tray into the bay until it locks in place.
CAUTION!
We strongly recommend using enterprise level hard disk drives in the Gigabyte server system. For
more information of recommended HDDs, please visit the Gigabyte website:
https://www.gigabyte.com and search for the specific product QVL from Support & Downloads.
2
3
5
1
- 43 -
1
4
6
System Hardware Installation
Advertisement
Table of Contents
