Replacing The System Fan Module - Gigabyte G482-Z50 User Manual

3-11 Replacing the System FAN Module

CAUTION!
Before you remove or install the system fans follow these steps:
• Make sure the system is not turned on or connected to the AC power.
• Disconnect all necessary cable connections. Failure to observe these warnings could result in
personal injury or damage to the equipment.
• The images below show the system fan module removal process for G482-Z50. The same
process applies to G482-Z51.
Follow these instructions to replace the system fan module:
[For all system fan modules]
1. Grasp the finger slots of the fan module and pull up to remove the fan module.
2. Reverse the previous steps to install the replacement fan module.
FAN #1
FAN #2
FAN #4
1
1
2
- 45 -
FAN #3
FAN #5
FAN #6
System Hardware Installation