Table of Contents
Advertisement
3-8
Replacing the System Fan Module
CAUTION!
Before you remove or install the system fans follow these steps:
• Make sure the system is not turned on or connected to AC power.
• Disconnect all necessary cable connections. Failure to observe these warnings could result in
personal injury or damage to the equipment.
Follow these instructions to replace the system fan module:
For Top Compartment Fans
1.
Squeeze the fan latch and lift the fan assembly from the chassis.
2.
Reverse the previous steps to install the replacement fan module.
For Bottom Compartment Fans
1.
Remove the screws on each side of the chassis.
2.
Use the release levers on the left and right side of the top compartment to pull outwards.
3.
Squeeze the fan latch and lift the fan assembly from the chassis.
4.
Reverse the previous steps to install the replacement fan module.
1
1
System Hardware Installation
- 37 -
3
2
Advertisement
Table of Contents
