Use The Rest Button - ZyXEL Communications Multy U WSR30 User Manual

Figure 6 WSQ50 Reset Button
Figure 7 WSR30 Reset Button

1.6.1 Use the Rest Button

Follow the steps below for a factory reset.
WSQ50:
Make sure the LED light on the top panel is not blinking white.
1
Press the reset button for at least five seconds or until the LED starts to blink red.
2
WSR30:
Press the reset button for at least five seconds or until the LED starts to blink amber.
Chapter 1 Get to Know Your Multy WiFi System
Multy WiFi System User's Guide
10