Changing Default Scan Job Settings - Epson ST-3000 User Manual

Table of Contents

Advertisement

Scan to setting
Density
Remove Shadow
Remove Punch Holes
Parent topic:

Changing Default Scan Job Settings

You can view or change the default scan job settings your product uses when you scan to your
computer. You do this using the Event Manager program.
1. Do one of the following to open Event Manager:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select Event Manager.
• Windows (other versions): Click
> Event Manager.
• Mac: Open the Applications folder, click Epson Software, and select Event Manager.
2. Open the Scanner (Windows) or Select Scanner (Mac) drop-down list and select your product, if
necessary.
3. Click Make Job Settings.
4. Open the Edit Job Settings drop-down list and select the scan job settings you want to view or
change.
5. Change the settings as necessary.
Note: If you create a new job, you can only assign it to the Custom Action setting. You can change
the settings of the other assigned jobs, but you cannot rename them or select a different job.
6. Click OK.
7. Click Close to close the Event Manager window.
Available options
–4 to +4
On
Off
On
Off
Starting a Scan Using the Product Control Panel
and select EPSON Software > Event Manager.
Description
Adjusts the lightness or darkness of scanned
images.
Erases the shadows that appear in the center of
a document when copying a book or the
shadows that appear around a document when
copying thick paper
Erases the binding holes on a document
or Start > All Programs or Programs > EPSON Software
123

Advertisement

Table of Contents
loading

Table of Contents