Epson ST-3000 User Manual page 153

Table of Contents

Advertisement

6. Select Print and press the OK button.
The nozzle check pattern is printed.
7. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
8. Do one of the following:
• If there are no gaps, the print head is clean. Press the OK button to select O.
• If there are gaps or the pattern is faint, press the right arrow button to select X. Follow the
instructions on the screen to clean the print head.
If you don't see any improvement after cleaning the print head up to 3 times, turn the product off and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic:
Print Head Nozzle Check
Related tasks
Refilling the Ink Tanks
Cleaning the Print Head Using the Product Control Panel
Loading Paper in the Cassette
153

Advertisement

Table of Contents
loading

Table of Contents