Table of Contents
Advertisement
Don't let the other end touch anything until the
next step. The other end of the negative (
doesn't go to the dead battery. It goes to a heavy,
unpainted metal engine part on the engine of the
vehicle with the dead battery.
5-6
8. Now connect the black
-
negative (
) cable to
the good battery's
-
negative (
) terminal.
-
) cable
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle with the dead battery.
If it won't start after a few tries, it probably
needs service.
9. Attach the cable at least
18 inches (45 cm) away
from the dead battery,
but not near engine parts
that move. The electrical
connection is just as
good there, but the
chance of sparks getting
back to the battery is
much less.
Advertisement
Chapters
Table of Contents
